Sharp HT-X1W Useful operation continued, E-31, To change the audio language audio output

HT-X1W

ENGLISH

Useful operation (continued)

!To change the audio language (audio output)

During playback, you can change the audio language (audio out- put).

! To brighten an image

1 During playback, press the SHIFT button and then the GAM- MA button to select "ON".

G OFF

DVD Operation

1 Whilst a disc is playing, press	Audio language information
the SHIFT button and then the
AUDIO button.
		Audio 1/3: AC-3 5.1 English

2Repeat step 1 to select the desired audio number. When playing DVD, the language changes as follows:

Audio 1/3: AC-3	5.1 English	1: Original <English>
		(Dolby Digital 5.1 ch Surround)
Audio 2/3: AC-3	2CH English	2: English
		(Dolby Digital 2 ch Surround)

When playing super video CD, video CD, audio CD and MP3, the sound changes as follows:

Mono Left

Mono Right

Stereo

Notes:

"The audio language on some DVDs may not be changed.

"For audio language and audio system, refer to the manual of the disc.

"When you set the unit to the stand-by mode or replace the disc, settings return to the default.

"ON" and "OFF" will be switched by each press of these but- tons.

2Within 10 seconds, press the

cursor (	or ) button to set the
				G	ON
level.
Level		Setting	Level		Setting
OFF		Normal image	ON	Brighter
ON		Slightly brighter	ON	A lot brighter

To restore the original brightness:

In step 1, select "OFF".

E-31

05/2/2 HT-X1W(LA)E4.fm TINSZA048AWZZ