ESTRADA™
CANOPY ELECTRICAL CONNECTIONS
Step 6a. Attach the fan wires to the ceiling fixture outlet box wiring by placing the bare ends of the wires side by side and then securing with a wire nut. Test that the connection is secure by pulling on the wire nut. Connect in this order:
Step 6b.
•GREEN leads from mounting plate and fan to GROUND conductor of power source. Secure with wire nut.
•WHITE wire from fan to white NEUTRAL wire in ceiling fixture outlet box. Secure with wire nut.
•BLUE wire and BLACK power wire from fan to BLACK power wire in ceiling outlet box. Secure with wire nut.
2 Black Wires
(Power) &
1 Blue Wire
2 White |
|
Wires |
|
(Neutral) | 3 Green |
| |
| Wires |
| (Ground) |
Wire Nut
CANOPY HATCH INSTALLATION
Step 7. Tuck the wires into the canopy with the |
| |
wire nuts pointed upwards, so that the WHITE and |
| |
BLACK wires are on opposite sides of the canopy |
| |
and all wires are clear of the canopy opening. | Canopy | |
Step 8a. Install canopy hatch with the last canopy | ||
Hatch | ||
screw and lock washer. To do this, tilt the fan body | Lock | |
away from the hatch opening. Tighten the screws | ||
firmly by hand only. | Washer | |
| ||
Step 8b. Straighten the fan, then check to ensure | Canopy | |
Screw | ||
that there is no movement between the canopy and | ||
| ||
ceiling or |
|
NOTE: Write down the Serial Number and the model number for future reference.
Tilt the fan
to install
last canopy
screw
BLADE INSTALLATION
Step 9. Attach the blades to the blade holders by first pressing the blade badge into the blade, then installing the blade holder using the four blade screws provided for each blade.
Using the screwdriver, tighten securely by hand.
Blade Screw (4 per blade)
Badge Style
Blade Holder
Blade
Badge
Blade
4743040 AT0907
7