Speed Operation | Casablanca Fan Company 4726D manual

3-SPEED • OPERATION

Pull-chain switches on the fan control the fan and reverse. Using the fan control pull-chain switch: Fan off at start.

First pull: fan ON, low speed

Second pull: medium speed

Third pull: high speed

Fourth pull: fan OFF

Direction of blade rotation is controlled by the reverse pull-chain on the side of the switch housing. No changes in household wiring are required.

Reverse

Pull-chain

Fan & Speed

Control Pull-chain

Switch

Optional Light

Pull-chain Switch

3-SPEED • OPTIONAL LIGHT FIXTURE INSTALLATION

Switch

NOTE: If a separate circuit is used to control the lights from a Housing wall control, the BLUE D1-Option wire in the canopy should be connected to that switch leg with the BLACK fan power wire.

1.Refer to light kit instructions to assemble and attach your light kit correctly.

2.Remove the two 8-32 screws from the switch housing cap.

3.Remove the plug from switch housing.

4.Install pull-chain switch and finger tighten collar on switch.

5.Connect one wire from pull-chain switch to the BLUE D1- Option wire. Secure splice with a wire nut.

6.Connect other wire from pull-chain switch to BLACK wire from light kit. Secure splice with a wire nut.

7.	Connect WHITE wire from switch housing to WHITE wire	Light
	from the light kit. Secure splice with a wire nut.	Fixture
8.	At the canopy, connect the BLACK and BLUE wires.

Remove Plug

Collar

Blue D-1

Option

Wire

PERFORMANCE AND ENERGY INFORMATION

	Airﬂow	Power Use	Airﬂow Efﬁciency (CFM/
Fan Speed	(CFM)*	(watts)	watt)
Low	1864	10	185
Med	4117	33	125
High	7126	82	87

* Measured according to the ENERGY STAR®-approved Solid State test method.

Ceiling fan airﬂow is measured in cubic feet per minute (CFM). Power use is measured in watts. To maximize energy savings,

•Choose a fan with high airﬂow efﬁciency (CFM/watt).

•Use ENERGY STAR®-labeled lighting in your fan.

•Remember to switch off your fan when you leave the room.

10	4743040 AT0907