Singer 9960 instruction manual Inserting the Bobbin

Page 15

D. INSERTING THE BOBBIN

1.Place bobbin into bobbin holder with the thread unwinding counter clockwise.

2.Draw thread into notch (a) while holding the bobbin.

3.Pull thread toward the left and along the inside of spring (b) until it slips into notch (c) making sure that thread does not slip out of notch (a).

4.Pull thread out about 10 cm (4 inches). Replace the bobbin cover. Set the left tab into the hole in needle plate and push the right side of bobbin cover down until it clicks into place.

NOTE: Use Singer bobbins only.

15

Image 15

Contents 9960 Important Safety Instructions Contents Blue neutral N Brown live L For European and Similar TerritoriesMain Parts Accessories Optional AccessoriesDust Cover Extension Table Changing the Presser FootChanging the presser foot Use a Singer brand needle for better sewing results Inserting the NeedleFABRIC, Thread Needle Table Type of Fabric Thread Size Needle Needle SizeFoot Controller Connecting MachineFunction of Each Part Extra Wide Table Control Panel To Turn OFF Audible Beep Winding the Bobbin Bobbin SettingSetting Spool of Thread on Spool PIN Removing the BobbinInserting the Bobbin Threading the Upper Thread Threading the MachineDrawing UP the Bobbin Thread 1. Raise the presser foot Threading the Needle EYEStarting to SEW Start and END of SeamUpper Thread Sensor Auto Tack Stitch Reverse StitchingTurning Corners Sewing Heavy FabricSeam Guide Thread Tension F3 F4 F5Helpful Hints MIRROR/REVERSE Stitch Selecting Utility Stitch PatternDirect Stitch Pattern Selecting Other Utility Stitch PatternsElongation Where to USE Each Stitch Straight Stitch Sewing Straight StitchStraight Stitch With Auto-lock Stitch Pattern No Basting Attaching the Darning Embroidery FootBasting Quilting Elastic Stitch SewingQuilting Joining the pieces of fabricElastic Band Sewing Zigzag Stitch SewingMULTI-STITCH Zigzag Free ARM SewingUsing the Overcasting Foot Using the General Purpose FootOvercasting Overlocking Blind HEM Stitching When sewing sharp angles Patch WorkApplique Inserting Zippers Centered Insertion Inserting Zippers Lapped Insertion To stitch around the zipper tab Diagram aButtonhole Sewing Page Bound Buttonhole Eyelet Automatic BAR-TACK Darning Thread Shank Sewing on ButtonsTriple Cording Narrow HemmingCording Single CordingAttaching the EVEN-FEED Foot Using the EVEN-FEED FootContinuous Decorative Pattern Sewing Thin FabricsDARNING/FREE-HAND Embroidery DarningFREE-HAND Embroidery Twin needle sewing may be used with decorative Twin Needle SewingSelecting Decorative & Letter Stitch selecting mode Decorative & Letter Stitch SewingShifting the Cursor To Check Selected Patterns Inserting PatternTo Delete Pattern Editing of Each Pattern Mirror / Reverse stitchElongation Setting the thread tension To Recall the Selected PatternsF1 F2 F3 F4 F5 F1 F3 F4 F5 Sewing Sewing the Selected PatternsLetter Stitch Pattern Decorative and Letter Stitch ChartAdjusting the Forward and Reverse Stitches Decorative Stitch PatternHook Race and Feed Dog MaintenanceCleaning Bobbin HolderHelpful Hints Problem Cause CorrectionMessages on LCD Page Page Page 9960English 34108 B0