Singer 9960 instruction manual Narrow Hemming, Single Cording, Triple Cording

Page 40

NARROW HEMMING

No. 1 Straight Stitch (Center Needle Position)

Rolled Hem Foot

1.Fold edge of fabric over about 3 mm (1/8 inch), then fold it over again 3 mm for about 5 cm

(2 inches) along edge of fabric.

2.Insert needle into the fold by rotating the hand wheel toward you, and lower the presser foot. Sew several stitches and raise the presser foot. Insert fabric fold into spiral of rolled hem foot. Move fabric back and forth until the fold forms a scrolled shape.

3.Lower the presser foot and start sewing slowly, while guiding raw edge of fabric scroll evenly into front of rolled hem foot.

CORDING

No. 9 Zigzag Stitch for Single Cording

No. 12 Multi Zigzag for Triple Cording

Cording Foot

A. SINGLE CORDING

1.Set stitch pattern to No. 9. Insert the cord in the center groove of cording foot from the right side opening. Pull cord about 5 cm (2 inches) behind the foot.

2.Adjust the stitch width so that the stitches are just cover the cord. Lower the foot and sew slowly, guiding the cord.

B. TRIPLE CORDING

Set the stitch pattern to No. 12 and set the stitch width to 6.0-7.0.

Insert three cords into the slots of cording foot.

40

3 mm

5 cm

Image 40
Contents 9960 Important Safety Instructions Contents For European and Similar Territories Blue neutral N Brown live LMain Parts Optional Accessories AccessoriesDust Cover Changing the Presser Foot Extension TableChanging the presser foot Inserting the Needle FABRIC, Thread Needle TableType of Fabric Thread Size Needle Needle Size Use a Singer brand needle for better sewing resultsConnecting Machine Foot ControllerFunction of Each Part Extra Wide Table Control Panel To Turn OFF Audible Beep Bobbin Setting Setting Spool of Thread on Spool PINRemoving the Bobbin Winding the BobbinInserting the Bobbin Threading the Machine Threading the Upper ThreadThreading the Needle EYE Drawing UP the Bobbin Thread 1. Raise the presser footStart and END of Seam Starting to SEWUpper Thread Sensor Reverse Stitching Auto Tack StitchSewing Heavy Fabric Turning CornersSeam Guide F3 F4 F5 Thread TensionHelpful Hints Selecting Utility Stitch Pattern Direct Stitch PatternSelecting Other Utility Stitch Patterns MIRROR/REVERSE StitchElongation Where to USE Each Stitch Straight Stitch Straight Stitch SewingStraight Stitch With Auto-lock Stitch Pattern No Attaching the Darning Embroidery Foot BastingBasting Elastic Stitch Sewing QuiltingJoining the pieces of fabric QuiltingZigzag Stitch Sewing MULTI-STITCH ZigzagFree ARM Sewing Elastic Band SewingUsing the General Purpose Foot Using the Overcasting FootOvercasting Overlocking Blind HEM Stitching Patch Work When sewing sharp anglesApplique Inserting Zippers Centered Insertion To stitch around the zipper tab Diagram a Inserting Zippers Lapped InsertionButtonhole Sewing Page Bound Buttonhole Eyelet Automatic BAR-TACK Darning Sewing on Buttons Thread ShankNarrow Hemming CordingSingle Cording Triple CordingUsing the EVEN-FEED Foot Continuous Decorative PatternSewing Thin Fabrics Attaching the EVEN-FEED FootDarning DARNING/FREE-HAND EmbroideryFREE-HAND Embroidery Twin Needle Sewing Twin needle sewing may be used with decorativeDecorative & Letter Stitch Sewing Selecting Decorative & Letter Stitch selecting modeShifting the Cursor Inserting Pattern To Check Selected PatternsTo Delete Pattern Mirror / Reverse stitch Editing of Each PatternElongation To Recall the Selected Patterns Setting the thread tensionF1 F2 F3 F4 F5 F1 F3 F4 F5 Sewing the Selected Patterns SewingDecorative and Letter Stitch Chart Adjusting the Forward and Reverse StitchesDecorative Stitch Pattern Letter Stitch PatternMaintenance CleaningBobbin Holder Hook Race and Feed DogProblem Cause Correction Helpful HintsMessages on LCD Page Page Page 9960English 34108 B0