DECORATIVE & LETTER STITCH SEWING
You can combine decorative & letter stitches into a string by selecting each pattern.
A. SELECTING DECORATIVE & LETTER STITCH (selecting mode)
1.Press the decorative & letter stitch button. First 5 patterns of decorative patterns will be indicated on the lower line of LCD.
2.By pressing the decorative & letter stitch button, selecting group will change as below.
a.Decorative pattern
b.Gothic letter stitch
c.Script letter stitch
d.Italic letter stitch
e.Outline letter stitch
f.Russian letter stitch
3.After you select the group, press the scroll down button. Next 5 patterns of selected group will appear.
By pressing the scroll up or down button, you can scroll up or down in increments of 5 patterns.
4.To select a pattern, press the function button directly under the indicated pattern.
Selected pattern will be indicated on the top left side of LCD.
5.Using this same procedure, select the next patterns.
Patterns will appear at the top of the LCD in the order selected.
6.As selected patterns over the indicating area,
disappear from the screen, you can check them by pressing the cursor buttons. (See next page)
NOTE:
Machine can memorize a maximum of 60 patterns. You can combine the tack stitch by pressing the tack button. This is used for sewing a single combination of patterns. (See next page 48)
B. SHIFTING THE CURSOR
Additional patterns may be added to the end of a string of combined patterns. Shift the “I” cursor over to the right, following the pattern string and then select new patterns.
By pressing the cursor buttons, cursor will shift left or right. The cursor position will be highlighted.
a.Press the cursor left button”<“ and cursor will shift to the left.
b.By pressing the cursor right “>” button, cursor will shift right.
44