HELPFUL HINTS
PROBLEM | CAUSE | CORRECTION | Page |
|
|
|
|
| Machine not properly threaded. | 16 | |
Upper thread | Thread entwined around bobbin. | Remove entwined thread. | 15 |
breaks | Needle inserted incorrectly. | 8 | |
| Thread tension too tight. | Readjust thread tension. | 21 |
| Thread of incorrect size or poor quality. | Choose correct thread. | 8 |
|
|
|
|
Lower thread | Bobbin threaded incorrectly. | 15 | |
breaks | Bobbin wound unevenly or too full. | Rewind the bobbin. | 14 |
| Dirt on the bobbin holder. | Clean the holder. | 50 |
|
|
|
|
| Needle inserted incorrectly. | 8 | |
Machine skips | Bent or blunt needle. | Insert new needle. | 8 |
stitches | Incorrect size of needle. | Choose correct size needle for | 8 |
|
| fabric. |
|
| (on stretch fabric) | (use stretch needle) |
|
|
|
|
|
| Machine not properly threaded. | 16 | |
Fabric puckers | Bobbin threaded incorrectly. | 15 | |
| Blunt needle. | Insert new needle. | 8 |
| Thread tension too tight. | Readjust thread tension. | 21 |
|
|
|
|
Machine makes | Bobbin threaded incorrectly. | 15 | |
loose stitches or | Machine not properly threaded. | 16 | |
loops | Tension not adjusted properly. | Readjust thread tension. | 21 |
|
|
|
|
Stitch pattern is | Presser foot is not suited for the pattern. | Attach correct foot. | 25- |
distorted | Thread tension is not balanced. | Adjust the thread tension. | 21 |
| Forward and reverse stitch is not balanced. | Adjust the forward and reverse | 49 |
|
|
|
|
Threader does | Needle is not raised. | Raise the needle. | 10 |
not thread | Needle inserted incorrectly. | 8 | |
needle eye | Bent needle. | Insert new needle. | 8 |
|
|
|
|
Machine does | Feed dogs are lowered | Raise the feed dogs | 11 |
not feed properly | Stitch length not suitable for fabric. | Regulate stitch length. | 23 |
| Lint and dust accumulated around feed dog. | Clean the feed dog area. | 50 |
|
|
|
|
| Fabric pulled while sewing. | Do not pull fabric. | 18 |
| Needle is hitting the presser foot. | Select correct foot and pattern. | 25- |
Needle breaks | Needle inserted incorrectly. | 8 | |
| Incorrect size needle or thread for fabric | Choose correct size needle and | 8 |
| being sewn. | thread. |
|
|
|
|
|
Machine runs | Dirt or lint accumulated in the hook race and | Remove the needle plate and | 50 |
with difficulty | feed dog. | bobbin holder and clean the |
|
|
| hook race and feed dog. |
|
|
|
|
|
| Cord not plugged into electrical outlet. | Insert plug fully into outlet. | 9 |
| Power switch is not turned on. | Turn on the switch. | 9 |
Machine will not | Bobbin winder spindle is pushed to the right. | Push spindle to the left. | 14 |
run | Presser foot is not lowered. | Lower the foot. | 10 |
| Buttonhole Sewing Mode; |
|
|
| * Buttonhole lever is not lowered completely. | Lower the buttonhole lever. | 34 |
| * Buttonhole foot is not attached. | Attach the buttonhole foot. | 34 |
|
|
|
|
51