Singer 9960 instruction manual Eyelet

Page 37

10.Fold the fabric and stitch along the seams on each side, just a needle width from the original stitching line. Remove the basting.

c. Wrong side of fabric

11.Fold the fabric along the buttonhole end and stitch triangular ends on the original stitching line.

12.Press and trim the patch to within 5 mm of the stitching.

a. Right side of fabric c. Wrong side of fabric

NOTE:

When sewing weaker fabric, reinforce buttonhole area. Cut a patch of fusible interfacing 3 cm wider and 2 cm longer than the buttonhole. Fuse to wrong side over each buttonhole marking.

EYELET

This stitch pattern is used for making belt holes and other similar applications.

101Eyelet Satin Foot (B)

You can choose 3 sizes of eyelets by changing the stitch length.

1.Place the fabric under the presser foot and lower the presser foot. Start the machine. Machine will sew the eyelet and stop automatically.

2.Press the thread cutter button and raise the presser foot.

3. Make a hole in the center of the eyelet.

Note:

Eyelet punch is not provided with this machine.

37

Image 37

Contents 9960 Important Safety Instructions Contents Blue neutral N Brown live L For European and Similar TerritoriesMain Parts Optional Accessories AccessoriesDust Cover Changing the Presser Foot Extension TableChanging the presser foot FABRIC, Thread Needle Table Inserting the NeedleType of Fabric Thread Size Needle Needle Size Use a Singer brand needle for better sewing resultsFoot Controller Connecting MachineFunction of Each Part Extra Wide Table Control Panel To Turn OFF Audible Beep Setting Spool of Thread on Spool PIN Bobbin SettingRemoving the Bobbin Winding the BobbinInserting the Bobbin Threading the Upper Thread Threading the MachineDrawing UP the Bobbin Thread 1. Raise the presser foot Threading the Needle EYEStart and END of Seam Starting to SEWUpper Thread Sensor Auto Tack Stitch Reverse StitchingSewing Heavy Fabric Turning CornersSeam Guide F3 F4 F5 Thread TensionHelpful Hints Direct Stitch Pattern Selecting Utility Stitch PatternSelecting Other Utility Stitch Patterns MIRROR/REVERSE StitchElongation Where to USE Each Stitch Straight Stitch Straight Stitch SewingStraight Stitch With Auto-lock Stitch Pattern No Attaching the Darning Embroidery Foot BastingBasting Quilting Elastic Stitch SewingJoining the pieces of fabric QuiltingMULTI-STITCH Zigzag Zigzag Stitch SewingFree ARM Sewing Elastic Band SewingUsing the General Purpose Foot Using the Overcasting FootOvercasting Overlocking Blind HEM Stitching Patch Work When sewing sharp anglesApplique Inserting Zippers Centered Insertion Inserting Zippers Lapped Insertion To stitch around the zipper tab Diagram aButtonhole Sewing Page Bound Buttonhole Eyelet Automatic BAR-TACK Darning Thread Shank Sewing on ButtonsCording Narrow HemmingSingle Cording Triple CordingContinuous Decorative Pattern Using the EVEN-FEED FootSewing Thin Fabrics Attaching the EVEN-FEED FootDarning DARNING/FREE-HAND EmbroideryFREE-HAND Embroidery Twin needle sewing may be used with decorative Twin Needle SewingDecorative & Letter Stitch Sewing Selecting Decorative & Letter Stitch selecting modeShifting the Cursor Inserting Pattern To Check Selected PatternsTo Delete Pattern Mirror / Reverse stitch Editing of Each PatternElongation To Recall the Selected Patterns Setting the thread tensionF1 F2 F3 F4 F5 F1 F3 F4 F5 Sewing Sewing the Selected PatternsAdjusting the Forward and Reverse Stitches Decorative and Letter Stitch ChartDecorative Stitch Pattern Letter Stitch PatternCleaning MaintenanceBobbin Holder Hook Race and Feed DogHelpful Hints Problem Cause CorrectionMessages on LCD Page Page Page 9960English 34108 B0