ASSEMBLY INSTRUCTIONS
Blade Knob (D) |
|
| Motor |
Clips (G) |
|
| Assembly (C) |
|
|
| Control |
| Rear Grille |
| Panel |
|
|
| |
| Mounting |
|
|
| Nut (E) | Rear Grille (F) |
|
|
|
| |
Fan Blade |
|
| Metal Fan Pole (A) |
Front Grille |
|
|
|
|
|
| Height Adjustment |
|
|
| Knob (B) |
|
|
| Metal Fan Pole (A) |
|
| Base | Pole Base Cover |
|
|
|
A.Base Assembly
•Place base on a flat surface
•Fit bottom of Metal Fan Pole (A) into circular recess in fan base (Fig.2).
B.Securing the Fan Pole to the Base
•Align 3 screw holes at the base of Metal Fan Pole (A) with the 3 holes at the base.
•Secure the Metal Fan Pole to the base by inserting and tightening the 3 screws in the 3 holes on the bottom of the base (Fig. 2).
•Slide the Pole Base Cover into place in the base and turn
C.Determining the Height of the Fan
•Turn the Height Adjustment Knob (B) in a
•Pull the Metal Pole Extension out of the Metal Fan Pole to the desired height.
•Turn the Height Adjustment Knob (B) in a CLOCKWISE direction to tighten and secure the Metal Pole Extension into place at the desired height.
Fig. 1 |
| Metal |
|
| Pole |
A | B |
Metal | Height |
Fan | Adjustment |
Pole | Knob |
Fig. 2 | A |
| |
| Metal |
| Fan |
| Pole |
Screws |
|
3