ENGLISH
Inspection and repairs
•Switch off the appliance before cleaning, changing accessories or approaching parts which move in use
•Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.
•Do not use the appliance if any part is damaged or defective.
•Have any damaged or defective parts repaired or replaced by an authorised repair agent.
•Before use, check the power supply cord for signs of damage, ageing and wear.
•Do not use the appliance if the power supply cord or mains plug is damaged or defective.
•If the power supply cord or mains plug is damaged or defective it must be repaired by an authorised repair agent in order to avoid a hazard. Do not cut the power supply cord and do not attempt to repair it yourself.
•Never attempt to remove or replace any parts other than those specified in this manual.
Electrical safety
Before use, check that the mains voltage corresponds to the voltage on the rating plate.
This appliance is double insulated in accordance with EN
•To avoid the risk of electric shock, do not immerse the cord, plug or motor unit in water or other liquid.
•Check that the supply voltage shown on the rating plate of the appliance matches that of your electrical system. Any connection error will invalidate the guarantee.
Mains Plug Replacement
If a new mains plug needs to be fitted:
•Safely dispose of the old plug.
•Connect the brown lead to the live terminal of the new plug.
•Connect the blue lead to the neutral terminal.
•If the product is class l (earthed), connect the green / yellow lead to the earth terminal.
Warning! If your product is class ll double insulated (only 2 wires in the cord set), no connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs
Any replacement fuse must be of the same rating as the original fuse supplied with the product.
•If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.
•Allow the appliance to cool before fitting or removing any parts and before cleaning.
•Do not immerse the appliance in liquid.
Fitting and Assembling
Make sure your fan is switched off before connecting to or disconnecting from power supply. Ensure that the voltage rating on the base plate corresponds to the main voltage at your home.
4