ENGLISH
The Fan guard can also be positioned vertically depending upon the direction of flow desired. For this switch OFF the fan first, let the fan come to halt, then with one hand hold the stand and with the other hand, move the guard assembly up or down depending upon the desired angle required. To make the fan oscillate pin down. To make it stop oscillation, pull it up.
ON/OFF button
Your fan can be controlled by pushing
the buttons, which can be set on the ON/OFF Control panel or on the Remote
Control.
Press the On/Off button once to operate the fan and once again to make the fan stop running.
Speed button
Your Fan has a speed control
button to keep the desired air + SPEED - flow through your room. The
speed of the fan can be adjusted by pressing the button. The speed will be displayed on the LCD. To increase the speed press the ” + “ button continually until it reaches the maximum of 4.To decrease the speed press the “ _ ” button continually until the running speed reaches the minimum of 1. The can be operated by remote control as well fan.
Timer
The timer can be used to set the running time of the fan, which can vary from 1 to 8 hrs. The number of times the timer button is pressed will
set the running time which | + | TIMER | - |
will be displayed on the LCD. |
|
For example: If the timer is pressed once, the operating time will be set at 1hr and if the timer is pressed 4 times, the operating time will be set at 4 hours. The can be operated by remote control as well fan.
The Fan guard can also be positioned vertically depending upon the direction of flow desired. For this switch OFF the fan first, let the fan come to a halt, then with one hand hold the stand and with the other hand, move the guard assembly up or down depending upon the desired angle required.
To make the fan oscillate, press the oscillation pin down. To make it stop oscillation, pull it up.
Remote control
Please inset 2’AAA’ size batteries into the remote as per making in the remote cavity.
Always face the LED on your remote towards the fan when you are operating the fan with remote.
To increase the speed, press the increase speed button once with every press of button the speed increases by onestep.Your fan is a four speed fan.To run the fan at maxmimum speed , press the “speed+” button four times. In similar fashion, to reduce speed press the “speed_” button.
Your remote also has timer control functions. As explained under “Times” functioning, the “time+”
&”time_” buttons can be operated to set the running time of fan.
The On/Off button operates and switches off the fan from your remote.
6