Installation
Install the fan assembly
Warning
Warning
To prevent the enclosure from tipping, all four pins must be in engaged in the enclosure frame before installing the fan assembly.
To avoid personal injury or damage to the Rack Air Removal Unit or the enclosure, two people should support the fan assembly while another places the fan assembly onto the enclosure.
1.Align the lower pin with the hole in the hinge pin bracket on the fan frame and insert the pin into the hole.
2.Align the upper hinge hole with the hole in the upper hinge pin bracket and insert the hinge screw into the holes.
3.Tighten the hinge screw with the included 5/32" hex wrench.
NetworkAIR Rack Air Removal Unit Installation | 7 |