APC ACF102BLK manual Temperature Override, How to set the temperature override

Operation

How to set the temperature override

The temperature override switch is recessed inside the space marked A-Link Address. Use a small tool such as a pocket screwdriver to set the DIP switch to the correct position. Set the DIP switch labeled 1 to the desired position according to the table below.

1 2 3 4

Warning

Note

Temperature

Override

Symbol Temp Override

Enabled

Disabled

When in kW mode and using a UPS that is 3000VA or lower, disable the temperature override to prevent the power draw from exceeding the limitations of the UPS.

When using the APC Environmental Management System, you can change the temperature override setpoint.

NetworkAIR Rack Air Removal Unit Installation 13