Operation
Start-up
Do not remove the air intake guards.
Warning
Use the fan speed selector to set the fan speed based on either the wattage output of the equipment in the rack or the desired exhaust temperature.
kW | 6 | C |
5 | 38 | |
3 |
| 35 |
232
OFF 29.5
Fan Speed Selector
| Item | Description |
|
|
|
KW settings | Set the fan speed according to the wattage output of the | |
|
| equipment in the rack. |
|
|
|
Fan speed selector | Control the fan speed by wattage output or exhaust | |
|
| temperature. |
|
|
|
Exhaust temperature | Set the Rack Air Removal Unit to set the fan speed based on | |
| settings | the exhaust temperature. |
|
|
|
Remote Setting | Set the Rack Air Removal Unit to be controlled by a | |
|
| connected APC Environmental Management System. |
NetworkAIR Rack Air Removal Unit Installation | 9 |