Routine care for your extractor
Clean the nozzle
Unplug extractor from electrical outlet.
➤Wipe debris off nozzle (A) and front of cleaner with a damp cloth (Fig. 31).
Clean the brushes
Unplug extractor from electrical outlet.
➤Remove solution and recovery tanks to prevent possible leaks.
➤Tilt extractor back so handle rests on the floor (Fig. 32).
➤Remove any carpet fibers or strings that may be attached to the brushes (Fig. 33).
Storing your extractor
31
A
32
✓ Empty solution tank and rinse thoroughly. |
✓ Place empty solution tank on extractor. Turn extractor ON. |
Squeeze trigger and push extractor forward and back several |
times, using the extractor to pick up the remaining liquid. |
This will clear any solution remaining inside the extractor. |
✓ Empty recovery tank, rinse thoroughly and let air dry. |
✓ Allow brushes and underside of extractor to air dry |
A
33
34
thoroughly before storing extractor on a carpeted or wood |
surface. |
✓ Push up on the collar (A) and lower the telescoping handle. |
Rotate knob (B) backwards to drop the upper handle into |
storage position (Fig. 34). |
B
Continued ➜ 11