Whirlpool SS330PEB, SS310PEB warranty Surface Burners, To remove Burners, To clean Burners

Personal Injury Hazard

Be sure both support rods are fully extended and in the locked position.

Failure to do so could result in per- sonal injury from the cooktop acciden- tally falling.

3.Wipe with warm, soapy water. Use a soapy steel-wool pad on heavily soiled areas.

4.To lower the cooktop, lift woktop from both sides while pressing the support rods back to unlock them. Lower the cooktop into place.

Replace reflector pans and surface burner grates.

Surface	burners
To remove	burners:
1. Lift up the woktop, following instructions
above.
2. Before cleaning, remove and throw		a-	Burner porta
away screws that hold each of the

burners in place. The screws prevent the burners from moving during shipment. Remove the shipping screws with a Phillips screwdriver.

3.Grasp burner head and tilt it to the right to release the two tabs from slots in the burner support.

4. Lift the end of the burner assembly, then		v	Burn& ~umort
pull away from the front of the range to
free the air shutter from the gas valve
orifice.
To clean	burners:	Gas	valve orifice

1.Wipe off surface burners with warm, soapy water and a sponge after each use. To remove cooked-on food, soak the burners in a vinegar and water solution for 20-30 minutes. Scrub with a plastic scrubbing pad.

17