3.To replace, fit the bottom corners of the door over the ends of the hinges. Push the door down evenly. The door will close only when it is on the hinges correctly. If hinges snap back against the oven frame, pull them back out.
Removing the oven bottom
The panel in the oven bottom can be removed for cleaning.
Burn Hazard
Make sure all parts are cool before removing.
Failure to do so could resutt in burns.
To remove:
1.Remove oven racks.
2.Grasp oven bottom at finger slots on each side.
3.Lift front edge of oven bottom enough to raise tabs from slots in front frame.
4.Push oven bottom back about W to release flange from front frame, then pull out.
To replace:
ot in front frame
1.Slide oven bottom into oven so rear tabs fit into slots in rear wall of oven.
2.Grasp oven bottom at finger slots and push it back and then down to hook the flange under the front frame.
3.Fit front tabs into slots in front frame.
19
