How to use
ON-OFF switch
To turn cleaner ON, push switch down. To turn cleaner OFF, push the switch up.
Some models are equipped with a
Normal Speed is to be used for regular cleaning of carpet and rugs and when using cleaning tools. Slide the switch down one notch from OFF to NORMAL speed.
‘Power Surge’ Speed is to be used for extra cleaning power on a heavily soiled area of carpet. Slide the switch down as far as possible and hold it in that position to en- gage the “POWER SURGE” speed. When the switch is re- leased, it will return to the NOR- MAL speed position.
To operate
Plug cord into electrical outlet. Your cleaner is now ready to op- erate. Turn the cleaner “ON” and, with handle in upright posi- tion, pull back on handle until the front of the cleaner is free from the carpet. This insures that the throw away bag is inflated.
Handle adjustment
The handle of your cleaner has three positions: Upright for storage and when using attach- ments; Operating for general operation on carpet and floors; Low for reaching under low fur- niture. Step on handle release lever to lower the handle.
OFF
N O R M A L -
‘POWER
SURGE’
OPERATING
9