How to assemble
Before assembly, identify the type of handle on your cleaner:
1)Square handle with molded grip or 2) Round handle. Then as- semble the cleaner according to handle type.
I)Square handle with molded grip
A. Put handle together
Remove cardboard from end of handle sections. Remove bolt and nut from upper handle sec- tion.
Slide the two handle sections to- gether, making sure that both cord storage hooks are on the same side of handle. Insert bolt through small holes and secure with nut. Tighten nut with screw- driver.
If the nut and bolt will not assem- ble as shown in the illustration, the holes in the handle are not lined up correctly.
B. Attach handle to the cleaner
Unscrew nut and remove bolt from handle bail.
Connect electric plug from the handle with the socket in the han- dle bail. Make sure plug and sock- et assembly is securely locked.
Carefully guide the plug and socket assembly into the handle. Push the handle down into the bail until it is securely in place.
i
5