Hoover U4361, U4359 manual How to replace the belt

Page 19

1	How to replace the belt
	Disconnect cleaner from electri-
	cal outlet.
	1. Turn cleaner over. Remove
	bottom plate by releasing lat-
	ches.

2. Release worn belt-from pulley.

3.Lift out agitator, remove old

belt and place new belt in groove of agitator.

4.Replace agitator by aligning the projection, located on one end of the agitator, with the slot on the wall of the cleaner base. Then push the agitator down into position.

Image 19

Contents Page Index Fill in and retain0IdL QB C UnpackingPage Put handle together How to assembleAttach handle to the cleaner Square handle with molded gripRound handle Attach outer bag to cleaner Check air freshener Attach throw away bag to cleanerHandle adjustment ON-OFF switchTo operate Pile height adjustment indicator Adjustment for carpet pile heightCarrying handle Special FeaturesAir freshener dispenser Quick cord release Cleaning ToolsEdge cleaning How to assemble hose and converterAttach converter Using cleaning toolsSelect proper cleaning tool Use correct handle position and carpet height adjustment To clean toolsAttach tool Bag MaintenanceBelt How to replace the headlightWhen to replace the belt HeadlightHow to replace the belt Agitator brushes When to replace brushesHow to replace the brushes If you have a problem Energy saving tips LubricationVcma