Hoover U4359, U4361 manual Attach outer bag to cleaner

Page 8

Replace plate on back of handle, by inserting projection on plate into lower hole on handle. Tabs on handle bail will fit into notches on plate. Position nut on bolt and tighten with screwdriver.

C. Attach outer bag to cleaner

The outer bag is connected at the rear of the cleaner by hooking the two projections at the bottom of the outer bag assembly into the grooved plate extending from back of cleaner base.

Then slide the lock lever (located just above the cleaner opening) to the left and fit bag against opening. Slide the lock lever to the right to fit completely over the bag lock.

Attach the bag to the spring hook, located on the top section of the handle.

7

Image 8

Contents Page Fill in and retain Index0IdL Unpacking QB CPage How to assemble Attach handle to the cleanerSquare handle with molded grip Put handle togetherRound handle Attach outer bag to cleaner Attach throw away bag to cleaner Check air freshenerTo operate ON-OFF switchHandle adjustment Adjustment for carpet pile height Pile height adjustment indicatorAir freshener dispenser Special FeaturesCarrying handle Cleaning Tools Edge cleaningHow to assemble hose and converter Quick cord releaseUsing cleaning tools Attach converterSelect proper cleaning tool Attach tool To clean toolsUse correct handle position and carpet height adjustment Maintenance BagHow to replace the headlight When to replace the beltHeadlight BeltHow to replace the belt When to replace brushes Agitator brushesHow to replace the brushes If you have a problem Lubrication Energy saving tipsVcma