Eiki LC-XB200 Maintenance and Cleaning Attaching the Lens Cap, Cleaning the Projection Lens

Models: LC-XB200

1 81
Download 81 pages 36.75 Kb
Page 63
Image 63

Maintenance and Cleaning

Attaching the Lens Cap

When moving this projector or while not using it over an extended period of time, replace the lens cap.

Attach the lens cap according to the following procedures.

1

Thread the string through the hole on the lens cap and

then tie a knot in the string to secure it in place.

2

To pass the other end of the string into the hole on the

bottom of the projector and pull at it.

Cleaning the Projection Lens

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens.

Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens.

Cleaning the Projector Cabinet

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning cloth. When the cabinet is heavily soiled, use a small amount of mild detergent and finish with a soft dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the cabinet.

When the projector is not in use, put the projector in an appropriate carrying case to protect it from dust and scratches.

63

Page 63
Image 63
Eiki LC-XB200 owner manual Maintenance and Cleaning Attaching the Lens Cap, Cleaning the Projection Lens