Eiki LC-XB200 owner manual Remote Control Top Control, Component RGB Scart

Video Input

Input Source Selection (Component, RGB Scart 21-pin)

Direct Operation

Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Remote Control	Top Control
COMPUTER button	INPUT button
Computer 1 ( RGB)
/(Component) / (Scart)
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)

Menu Operation

1	Press the MENU button to display the On-Screen	Input Menu
	Menu. Use the Point ed buttons to select Input and
	then press the Point 8 or the SELECT button.
2	Use the Point ed buttons to select Computer 1 and
	then press the Point 8 button.
3	Use the Point ed buttons to select Component or
	RGB(Scart) and then press the SELECT button.

Computer 1 ( RGB)

/(Component) / (Scart)

Computer 2 (PC digital) /

(AV HDCP) /

(Analog)

Video

S-video

RGB(PC digital)

Component

RGB (Scart)

When the input source is coming from video equipment connected to the COMPUTER

IN 1/COMPONENT IN terminal with aRGB(PC digital) Component-VGA Cable, select Component.

When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart).

✔Note:

When the Input Search function is set to On1 or On2, the input signal will be searched automatically (p.47).

40