Computer Input
Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA or UXGA with its
One of the following messages may appear when:
| The projector cannot recognize the connected |
Auto | |
| signal conforming to the provided PC Systems. |
| |
| Auto is displayed on the System Menu box |
| and the Auto PC Adjustment function works |
| to display proper images. If the image is not |
| projected properly, a manual adjustment is |
| required |
-----There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on p.67.)
| The preset system is manually adjusted in the |
Mode 1 | |
| PC adjust Menu. The adjusted data can be |
| |
| stored in Mode |
| PC Systems provided in this projector is chosen. |
SVGA 1 | |
| The projector chooses a proper system provided |
| |
| in the projector and displays it. |
*Mode 1 and SVGA 1 are examples.
PC System Menu
RGB(PC digital)
The PC System Menu Selected system is displayed.
Selecting Computer System Manually
PC system can also be selected manually.
PC System Menu
1 | Press the MENU button to display the |
Menu. Use the Point ed buttons to select Input and | |
| then press the Point 8 or the SELECT button. |
2 | Use the Point ed buttons to select System and then |
| press the Point 8 or the SELECT button. |
3 | Use the Point ed buttons to select the desired system |
and then press the SELECT button. |
Customized Mode
RGB(Computer 1)
Systems in this dialog box can be selected.
31