Eiki LC-XB200 Computer Input, Input Source Selection RGB Computer 1/Computer 2Analog, Input Menu

Computer Input

Input Source Selection (RGB: Computer 1/Computer 2(Analog))

Direct Operation

Choose either Computer 1 or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Remote Control

COMPUTER button

Computer 1 ( RGB)

/(Component) / (Scart)

Computer 2 (PC digital) /

(AV HDCP) /

(Analog)

Menu Operation

Top ControlINPUT button

Computer 1 ( RGB) /(Component) / (Scart)

Computer 2 (PC digital) /

(AV HDCP) /

(Analog)

Video

S-video

Input Menu

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ed buttons to select Input and
	then press the Point 8 or the SELECT button.
2	Use the Point ed buttons to select either Computer
	1 or Computer 2 and then press the Point 8 button to
	access the submenu items.
3	When Computer 1 is selected, use the Point ed
	buttons to select RGB and then press the SELECT

button.

RGB(PC digital)

NTSC

When Computer 2 is selected, use the Point ed	RGB(PC digital)
buttons to select RGB(Analog) and then press the
SELECT button.

Computer 1

✔Note:

When the Input Search function is set to On1 or On2 in the Auto setup function, the input signal will be searched automatically (p.47).

29