.
Turn the plastic ring counterclock- wise to lock the tool in place. Fig. 8.
For additional length, attach one or both* wands to the vinyl hose as de- scribed above.
To attach the tools to the other end of the wand, press down firmly on the white plastic spring latch. Fig. 9. Fit the attachment into place and release plastic latch when it fits over butto n on tool. It is now locked in place.
“Available with deluxe set only.
D. Regulating the suction
The suction regulator is located on the end of the vinyl hose attached to the cleaner. Set the regulator by turning the dial to minimum, medi- um, or maximum suction. Fig. 10.
When using the cleaning tools, the adjustment for carpet pile height should be set according to the surface on which the cleaner is standing. This will give added stability when using the attachments. Set the adjustment for pile height to LOW if using the cleaning tools in an area where there are bare floors anduse SHAG in carpeted areas.
After having followed the steps detailed above you are ready to use your clean- ing attachments. Simply turn the cleaner switch to the ON position and you are ready to clean above the floor and hard to reach areas.
The handle must be in the upright position for proper, effective use of tools.