Hoover 53441, 53439 manual HOW to Assemble, Attach handle to the cleaner

Page 5

HOW TO ASSEMBLE

A. Attach handle to the cleaner

Unscrew nut and remove bolt and plate from handle socket.

Place bottom section of handle into handle socket lining up small holes toward front of cleaner. Cord will run up indentation at base of handle,

Insert bolt into hole in front of handle.

Place plate over end of bolt and hole at back of handle. The tab at the bot- tom of the plate will fit into the han- dle and the tabs of the handle bail will fit the cutout areas of the plate.

Secure with nut. Tighten nut with screwdriver.

I

4

--l

Image 5

Contents Page FillinandmWn ImDortantsa#eauards Handle Unpacking the CLEANEd ’Attach handle to the cleaner HOW to AssembleHOW to USE Your Cleaner Attach cloth bag to cleanerHow to operate On-off switchAdjustment for carpet pile height Handle adjustmentsEdge cleaning Special FeaturesCleaning lightweight flexible rugs Carrying handleAttach converter Cleaning Tool AttachmentsUsing Cleaning Tools Page Attaching the tools Select the proper cleaning toolRegulating the suction How to empty the bag MaintenanceStoring attachments BagWhat belt to buy When to replace the beltBelt Page What brushes to buy Brushes When to replace brushesHow to replace the brushes Page User Check List Energy Saving Tips Hoover COMPANY, North CANTON, Ohio