Upright
Handle adjustments
The handle has three positions: Up- right for storage and when using attachments. Operating for general operation on carpet and floors. Low for reaching under low furniture.
Adjustment for carpet pile height
The cleaning of carpet and rugs takes place at the nozzle. This is the opening at the bottom of the cleaner where the agitator is located.
It is necessary to raise and lower the nozzle for various carpet pile heights.
The four positions are Low, Normal,
High and Shag.
Select the proper nozzle adjustment by tilting the cleaner forward and adjusting the lever until it “clicks” into position.
For best results the lever is conven- iently adjusted by hand.
Select the adjustment for the carpet pile height according to the chart below.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
.
Low | for low pile and kitchen carpet |
. . . . . . . . . . . . . . . | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..* |
Normal for rugs with normal pije height and for removing loose dirt from
| hard surface floors. |
|
. . . . . . . . . . . . . | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | . . . . . . . . . . . . . . . . . ..* |
High | for rugs with normal pile height but thicker density; if the cleaner | |
| is difficult to push at “Normal”, move the lever to the “High” | |
| position |
|
.................. | * | * |
Shag | for very long or shag pile carpet |
|
. . . . . . . . . . . . . . . | . . . . . . . . . . . . . . . . . . . ...*.....* | |
Note: If the “Low” setting is used when cleaning normal or shag pile carpet, there is an increase in the belt load and pushing effort is greatly increased.
6
-