Empty bag by placing large opening over a paper. The bulk of the dirt will fall on the paper. Shake bag until clean.
Replace the bag closure clip and at- tach bag to cleaner following the instructions give on page 5.
The belt
The belt of your HOOVER commercial cleaner controls the speed of the agita- tor and it is important for the effective operation of the cleaner. The belt is located under the bottom plate of the cleaner and should be checked from time to time to be sure it is in good condition.
When to replace the belt
To check the belt, remove the bottom plate (see following section). If the belt is stretched or cut; or if the agitator fails to rotate, replace the belt.
What belt to buy
To assure effective operation, use only genuine HOOVER belts with your HOOVER commercial cleaner. When purchasing a new belt ask for Hoover part No. 49258.
How to replace the belt Disconnect cleaner from electrical outlet.
1.Turn cleaner over. Remove metal plate on bottom of cleaner by push- ing latches toward outside of cleaner.
13
IL |
|
| ._I | |
! |
|
|
|
|
|
|
|
|