The brushes
When to replace brushes
When brushes are worn and bristles do not touch the edge of a card held across the bottom plate, they should be replaced. Always replace both brushes at the same time to maintain cleaning effectiveness.
What brushes to buy
When purchasing new brushes, ask for Hoover Part No. 48445001. They are designed to be used with your cleaner.
How to replace the brushes
Disconnect the cleaner from electrical outlet.
1.To replace worn brushes, remove bottom plate, belt and agitator, following directions given on preceding pages.
2.Turn end plates of agitator in opposite directions to loosen.
3.Continue turning until one end comes off exposing the end section. Then, pry out end section exposing the shaft.
4.Gently tap the end of the shaft with hammer to loosen opposite end.
5.Pull shaft and end assembly from agitator.
15