2. Release worn belt from pulley.
3.Lift out rug agitator, remove old belt and place new belt in groove of rug agitator.
4.Replace agitator. On one end of the agitator roll there is a raised metal plate. Make sure that this end is placed in groove on side of cleaner.
5.Place belt on pulley. Side of belt nearer cleaner should be in line with arrow on bottom of cleaner.
6.Replace metal plate. Place metal knobs on front end of plate in wire holders. Check to see that latches are pushed back and will not be covered by plate. Place plate in position and latch securely.
14