How To Replace Filters:
Motor Filter
Check the motor filter each time the cyclonic cassette is emptied. Cleaning the motor filter is recommended at this time.
To Clean Motor Filter
1. Remove the cyclonic cassette.
2. Remove filter from inside the cassette compartment (lower left side).
3. Shake filter to remove excess dust. If necessary, the filter can be cleaned by vacuuming with another cleaner.
4. Reinstall filter.
5. Replace the cyclonic cassette.
HEPA Filter (on selected models)
Check the HEPA filter each time the
cyclonic cassette is emptied. Replace
twice a year or after you have emptied Latch the cassette 6 times.
MICRON Filter (on selected models)
Check the MICRON filter each time the cyclonic cassette is emptied.
To remove HEPA Filter
1. Push down latch and rotate the HEPA filter back.
2. Then lift the filter up to remove.
To replace HEPA Filter
1.Place bottom tabs of new filter into slots.
2.Rotate the HEPA filter toward cleaner.
3. Push upward on the latch to secure into place.
Obtain replacement filters from a local dealer or order them from The Eureka Company, Bloomington, IL.
To remove MICRON Filter
1.Push down latch and rotate the MICRON filter back.
2.Then lift the filter out of the filter housing to remove.
To replace MICRON Filter
1.Place new filter into filter housing then put bottom tabs of filter into slots.
2.Rotate the MICRON filter toward cleaner.
3.Push upward on the latch to secure into place.
14