Eureka 5190 Series warranty HOW to Assemble Vacuum Cleaner Handle

Page 5

HOW TO ASSEMBLE VACUUM CLEANER HANDLE

CAUTION: Moving parts, make sure on/off switch is in off position before plugging in.

Upper Handle

	STEP 3
	CAUTION: Do not pinch the	Lower
	transmission cable between	Lower
	transmission cable between	Handle
	the upper and lower handle.	Handle
	the upper and lower handle.

Lift the upper handle and place it over the lower handle.

Line the holes up (one on each side of the lower handle). The transmission cable should stay in place in the lower handle tube during assembly.

STEP 1

Pull the foam protector pieces from the ends of the handle and throw away.

STEP 2

Find the 2-part bolt in the plastic bag with the owner’s guide. It is the only part needed to assemble the vacuum cleaner handle. See below.

2-Part Bolt

Transmission

CableFlexible

Hose

STEP 4

Move flexible hose off hose hook to allow easier access to the handle area.

While the holes in the handle are lined up, put the 2-part bolt in the holes and use a flat blade screwdriver to tighten securely.

The handle is now installed. The vacuum is now fully assembled and ready for use.

5

Image 5

Contents Product to the store Do not return thisImportant Safeguards Conseils DE Sécurité General Information Service InformationUSA México Canada Rating PlateHOW to Assemble Vacuum Cleaner Handle Self-Propelled Selector HOW to USE the SELF-PROPELLED Vacuum CleanerUse Clean Under Furniture Beds, etc HOW to USE the SELF-PROPELLED Vacuum CleanerHow to Adjust the Cleaner Height Setting Extension Wand Nested Extension Wand to add reach HOW to USE the AccessoriesHose Strap Hose Upper Retainer Hose Nozzle Lower Hose Strap HookTo check if dirt sensor is working properly Maintenance of Dirt Alert Feature On some modelsHow to Check the Dirt Alert Sensors How To Replace Brush Roll Belt HOW to MaintainBrush Roll Brush Roll BeltRotate End Cap Left Right Detail Brush RollDetail Hose Assembly Hose Retainer HOW to Clear Hose ClogsTo Change Cassette Micron Filter How To Empty Cyclonic CassetteTo Change the Cassette Micron Filter Emptying the Cyclonic CassetteHow To Replace Filters Use 15 watt replacement light bulb, part number How to Change Light Bulb only for models with a headlightLift lens cover from cleaner Lens Cover Handle Release Problem Solving Cause Solution Genuine Eureka Bags, Belts and Filters Accessories/ToolsHoses Miscellaneous PartsPage USA Mexico Canada Eureka Limited WarrantyUpholstery nozzle Dusting brush Crevice tool Wands M. to 8 p.m., Central Standard Time, Monday through Saturday