Eureka 5190 Series warranty Important Safeguards

Page 2

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.

WARNING

To reduce the risk of fire, electric shock, or injury:

•Do not use outdoors or on wet surfaces.

•Do not leave vacuum cleaner when plugged in.Turn off the switch and unplug the electrical cord when not in use and before servicing.

•Do not allow to be used as a toy. Close attention is necessary when used by or near children.

•Use only as described in this manual. Use only manufacturer’s recommended attachments.

•Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center before using.

•Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run vacuum cleaner over cord. Keep cord away from heated surfaces.

•Do not use extension cords or outlets with inadequate current carrying capacity.

•Turn off all controls before unplugging.

•Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

•Do not handle plug or vacuum cleaner with wet hands.

•Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.

•This vacuum cleaner creates suction and contains a revolving brush roll and a power drive wheel. Keep hair, loose clothing, fingers, and all parts of body away from openings, brush roll, and power drive wheel.

•Do not place cleaner on furniture or stairs as the brush roll or drive wheel may cause damage. Place the cleaner on the floor with the handle in the storage position and the drive selector in the manual position while using attachments.

•Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

•Do not use without cyclonic cassette or filter(s) in place.

•Belt pulleys can become hot during normal use. To prevent burns, avoid touching the belt pulley when servicing the drive belt.

•Use extra care when cleaning on stairs.

•Do not use to pick up flammable or combustible liquids such as gasoline, or use in areas where they may be present.

•Store your cleaner indoors in a cool, dry area.

•Keep your work area well lighted.

•Unplug electrical appliances before vacuuming them.

SAVE THESE INSTRUCTIONS

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Do not return this Product to the storeImportant Safeguards Conseils DE Sécurité USA México Canada Service InformationGeneral Information Rating PlateHOW to Assemble Vacuum Cleaner Handle HOW to USE the SELF-PROPELLED Vacuum Cleaner Self-Propelled SelectorUse Clean Under Furniture Beds, etc HOW to USE the SELF-PROPELLED Vacuum CleanerHow to Adjust the Cleaner Height Setting Hose Strap HOW to USE the AccessoriesExtension Wand Nested Extension Wand to add reach Hose Upper Retainer Hose Nozzle Lower Hose Strap HookTo check if dirt sensor is working properly Maintenance of Dirt Alert Feature On some modelsHow to Check the Dirt Alert Sensors Brush Roll HOW to MaintainHow To Replace Brush Roll Belt Brush Roll BeltEnd Cap Left Right Detail Brush Roll RotateHOW to Clear Hose Clogs Detail Hose Assembly Hose RetainerTo Change the Cassette Micron Filter How To Empty Cyclonic CassetteTo Change Cassette Micron Filter Emptying the Cyclonic CassetteHow To Replace Filters Use 15 watt replacement light bulb, part number How to Change Light Bulb only for models with a headlightLift lens cover from cleaner Lens Cover Handle Release Problem Solving Cause Solution Hoses Accessories/ToolsGenuine Eureka Bags, Belts and Filters Miscellaneous PartsPage Eureka Limited Warranty USA Mexico CanadaM. to 8 p.m., Central Standard Time, Monday through Saturday Upholstery nozzle Dusting brush Crevice tool Wands
Top Page Image Contents