Eureka 5190 Series warranty HOW to USE the SELF-PROPELLED Vacuum Cleaner

Page 7

HOW TO USE THE SELF-PROPELLED VACUUM CLEANER (continued)

How to Adjust the Cleaner Height Setting

WARNING: Avoid injury. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts (such as the revolving brush roll and power drive wheel). Turn off the switch and unplug the electrical cord before changing the cleaner height setting.

1.Turn off the switch and unplug the electrical cord before changing the cleaner height setting. If you need to adjust the cleaner height setting to the next position, place the handle in the operating position. Rotate the height adjustment knob to the next position. This will make the cleaner easier to push.

2.Plug the electrical cord into an outlet.

3.Position the power switch to the on position, place the handle selector button to the self-propelled position and begin to vacuum.

On/Off 3 (I/O)

2

Handle Release

When finished cleaning, return handle grip selector button to manual position and place handle upright.

Height Adjustment Knob

1

Store or Use Attachments

Handle Release

Use

Clean Under

Furniture,

Beds, etc.

Thermal Cut Off

This cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner suddenly turns off, follow this procedure:

1.Push on/off rocker switch to “OFF” position.

2.Unplug cleaner.

3.Check for source of overheating problem (i.e. clogged hose or clogged filter).

4.If a clogged hose or clogged filter is found, unclog the hose or replace the filters.

5.Wait at least 30 minutes before attempting to reuse the cleaner.

6.After 30 minute cool down period, plug the cleaner in and push the rocker switch to on position. The cleaner should turn on.

7.If the cleaner still does not operate, take it to any Eureka Authorized Service Center for repair.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Product to the store Do not return thisImportant Safeguards Conseils DE Sécurité Rating Plate Service InformationGeneral Information USA México CanadaHOW to Assemble Vacuum Cleaner Handle Self-Propelled Selector HOW to USE the SELF-PROPELLED Vacuum CleanerHow to Adjust the Cleaner Height Setting HOW to USE the SELF-PROPELLED Vacuum CleanerUse Clean Under Furniture Beds, etc Hose Upper Retainer Hose Nozzle Lower Hose Strap Hook HOW to USE the AccessoriesExtension Wand Nested Extension Wand to add reach Hose StrapHow to Check the Dirt Alert Sensors Maintenance of Dirt Alert Feature On some modelsTo check if dirt sensor is working properly Brush Roll Belt HOW to MaintainHow To Replace Brush Roll Belt Brush RollRotate End Cap Left Right Detail Brush RollDetail Hose Assembly Hose Retainer HOW to Clear Hose ClogsEmptying the Cyclonic Cassette How To Empty Cyclonic CassetteTo Change Cassette Micron Filter To Change the Cassette Micron FilterHow To Replace Filters Lift lens cover from cleaner Lens Cover Handle Release How to Change Light Bulb only for models with a headlightUse 15 watt replacement light bulb, part number Problem Solving Cause Solution Miscellaneous Parts Accessories/ToolsGenuine Eureka Bags, Belts and Filters HosesPage USA Mexico Canada Eureka Limited WarrantyUpholstery nozzle Dusting brush Crevice tool Wands M. to 8 p.m., Central Standard Time, Monday through Saturday
Top Page Image Contents