HOW TO USE THE ACCESSORIES
NOTE: Do not place cleaner on furniture or steps as the brush roll or drive wheel may cause damage. Place cleaner on floor with the handle in storage position while using accessories.
1.On the back of the vacuum, pull hose nozzle out of the lower hose retainer.
2.Grasp the hose near the upper hose retainer.
a.Be sure to leave the hose cradled in the upper hose retainer.
b.Leave hose strap in place on hose.
3.Pull and stretch hose down so hose strap (A) can be attached to the strap hook (B). Your cleaner will look like PICTURE 1 below when completed correctly.
4.Place desired accessory onto end of the wand portion of the hose assembly or extension wand.
5.When you are through using the attachments, take the hose strap off the strap hook and replace the hose nozzle into the lower hose retainer.
6.Leave hose strap in place on hose for future use.
3 |
|
(A) | 2 |
Hose Strap |
Hose
2
Upper
Hose
Retainer
| 1 |
1 | Hose Nozzle |
| |
Lower Hose |
|
Retainer | 3 |
| (B) |
| Strap Hook |
Crevice Tool cleans corners, baseboards, between cushions, sliding door tracks, etc.
.
Dusting Brush is for furniture, blinds, books, lamp shades, shelves, etc.
.
Upholstery Nozzle is for curtains, draperies, cushions, fabrics, etc.
.
Extension Wand
Nested Extension Wand to add reach.
♣ | ♣ |
|
•Grasp both wands near ridges.
• Pull apart.
♣
•Turn ridge end to center. • Push wands together.
PICTURE 1
8