J
K
Maintenance
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.
Troubleshooting
Problem | Possible Cause | Possible Solution |
• Unit will not start. | • Battery not charged. | • Check battery charging |
• Battery will not charge. | • Charger not plugged in. | requirements. |
• Plug charger into a working | ||
|
| outlet. Refer to “Important |
|
| Charging Notes” for more details. |
|
| • Check current at receptacle by |
|
| plugging in a lamp or other appliance. |
|
| • Check to see if receptacle is |
|
| connected to a light switch which |
|
| turns power off when you turn out |
| • Surrounding air | the lights. |
| • Move charger and tool to a | |
| temperature too hot or | surrounding air temperature |
| too cold. | of above 40 degrees F(4.5°C) or |
|
| below 105 degrees F (+40.5°C). |
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at
Accessories
Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:
WARNING: The use of any accessory not recommended for use with this tool could be hazardous.
7