SERVICE PROCEDURE PDV24-VI
Control Board Replacement
DANGER
120 volt exposure. To avoid personal injury, unplug while performing this procedure.
Slots in
Depresscontrol panel plastic
tabs
Unhook tabs from control panel slots
Control board replacement | Step 2. Tilt control panel to the | |
|
| right and slide control hook tabs |
Step 1. Depress left plastic tabs and | from slots in control panel. |
pull out from slots in control panel
Step 3. Unplug wire connections from board and replace.
Wire connections
Remove lower sensor
Remove clip, pull sensor out.
Remove clip
Pull out sensor
40