Bradford-White Corp U130T*FRN, Eco Defender warranty Thermopile Replacement

Page 11

SERVICE PROCEDURE ED-II

Thermopile Testing and Replacement

THERMOPILE REPLACEMENT

Step 1. Turn off gas supply to water heater. Rotate gas control knob to the “OFF” position.

Gas Control Knob Shown In

“OFF” Position

Step 2. Remove outer jacket door.

Step 3. Remove right side inner door and burner door per SERVICE PROCEDURE RG-I, steps 3a through 3g.

Step 4 Disconnect the red thermopile wire from the wire harness and the white thermopile wire from the resettable thermal switch. Follow the thermopile leads to the pilot bracket. Disconnect the thermopile from the pilot bracket (7/16" wrench).

Step 5. Install new thermopile into pilot bracket and tighten the nut to the pilot bracket (7/16" wrench). Position thermopile wire against left side inner door flange at its original position. Connect the red thermopile wire to the red lead from the wire harness. Connect the white thermopile wire to the resettable thermal switch.

Step 6. Inspect inner door gasket per SERVICE PROCEDURE ED-I, Step 4.

Step 7. Install right side inner door and burner door per SERVICE PROCEDURE ED-I, Step 7 through Step 16.

Step 8. To resume operation follow the instructions located on the lighting instruction label or the lighting instructions located in the installation and operation manual.

Thermopile Position

Page 11

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Bradford White Bradford White Introduction How to Use This Manual LED Status Probable Cause Service ProcedureDamage to Thermowell wire Inner Door Removal Procedure Place. do not Over Tighten Screws Inner Door Gasket Replacement ProcedurePosition Thermopile Wire Pilot Tube and Igniter Wire Open Circuit Thermopile Testing Closed Circuit Thermopile Testing Honeywell ControlThermopile Replacement PILOT/ELECTRODE Assembly Inspection Cleaning and Replacement IGNITER, Electrode Testing and Replacement Thermal Well Testing Sensor Resistance at Various Temperatures Determine Water Temperature Inside TankGas Control & Thermal Well Removal From Water Heater Gas Control Assembly to Thermal Well Temperature Range oF Resistance Range kOhms Chamber Sensor TestingBurner Cleaning Main Burner Inspection Cleaning and ReplacementBurner Cleaning Resettable Thermal Switch Continuity Testing Do not Over Tighten Screws Resettable Thermal Switch ReplacementScreenLok Flame Arrestor Cleaning DIP Tube Inspection and Replacement Anode Inspection and Replacement Page Page Parts@bradfordwhite.com Techserv@bradfordwhite.com

U130T*FRN, Eco Defender specifications

Bradford-White Corp is a leading name in the water heating industry, known for its commitment to quality and innovation. One of its standout products is the U130T*FRN Eco Defender, a water heater that combines advanced technologies with user-focused design.

The U130T*FRN Eco Defender is a high-efficiency residential water heater that offers various features aimed at maximizing both performance and energy savings. One of its key characteristics is its environmentally friendly operation. This model meets stringent energy efficiency standards, making it an excellent choice for eco-conscious homeowners looking to minimize their carbon footprint. The Eco Defender serves not only to heat water but also to deliver an energy-efficient solution that can contribute to lowering utility bills.

Equipped with a durable design, the U130T*FRN features a robust tank constructed from high-grade steel, complemented by a glass lining that helps prevent corrosion and extend the lifespan of the unit. In addition, it utilizes an advanced electronic control system that optimally monitors and adjusts the heating process, ensuring that hot water is both readily available and efficiently produced.

Another remarkable feature of the Eco Defender is its innovative venting system. The unit supports various venting configurations, including conventional and power vent, providing flexibility for installation in different home environments. This capability not only simplifies the installation process but also enhances the overall efficiency of the unit under varying conditions.

Safety is also a top priority for Bradford-White, and the U130T*FRN encapsulates numerous safety features, including a temperature and pressure relief valve and a factory-installed high-temperature limit switch. These features are critical in preventing overheating and ensuring reliable operation over time.

In terms of capacity, the U130T*FRN is available in several sizes to meet differing household demands. Whether for a small apartment or a larger family home, this model can provide sufficient hot water to meet consumption needs without sacrificing efficiency or performance.

In summary, the Bradford-White Corp U130T*FRN Eco Defender represents a well-rounded solution for residential water heating, boasting innovative technologies, durable construction, and a focus on energy efficiency and safety. This model not only meets the demands of modern households but does so in a way that promotes sustainable living. With Bradford-White's reputation for reliability, homeowners can trust the Eco Defender to deliver comfort and peace of mind.
Top Page Image Contents