What to do if YOU Smell GAS

LIGHTING INSTRUCTIONS

FOR YOUR SAFETY READ BEFORE OPERATING

WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing

property damage, personal injury or loss of life.

A. This water heater does not have a		∙	Immediately call your gas supplier from a
	pilot. It is equipped with a direct		neighbor’s phone. Follow the gas supplier’s
	ignition device, which automatically		instructions.
	lights the burner. Do not try to light	∙	If you cannot reach your gas supplier, call the fire
	the burner by hand.		department.
B.	BEFORE OPERATING: Smell all	C.	Use only your hand to operate the remote control
	around the appliance area for gas.		keypad. Never use tools. If the remote keypad
	Be sure to smell next to the floor,		doesn’t work, do not try to repair it, call a qualified
	because some gas is heavier than		service technician. Forced or improper repair
	air and will settle on the floor.		may result in a fire or explosion.
WHAT TO DO IF YOU SMELL GAS		D.	Do not use this water heater if any part has been
∙	Do not try to light any appliance.		under water. Immediately call a qualified service
∙	Do not touch any electric switch; do		technician to inspect the water heater and to
	not use any phone in your building.		replace any part of the control system and any
			gas control which has been under water.

OPERATION INSTRUCTIONS

1.STOP! Read the safety information above before proceeding.

2.Set the thermostat to the lowest setting.

3.Turn off all power to the electrical appliance.

4.This water heater does not have a pilot. It is equipped with a direct ignition device, which automatically lights the burner. Do not try to light the burner by hand.

5.Turn the manual valve located at the gas inlet of the appliance clockwise to “OFF” (See Figure 16).

6.Wait (5) minutes to clear out any gas. If you then smell gas, STOP! Follow “B” in the safety information above on this label. If you don’t smell gas, go to next step.

7.Turn the manual valve located at the gas inlet of

appliance counterclockwise to “ON” (See Figure 16).

8.Turn on all electric power to the appliance.

9.Set the thermostat to desired setting.

10.If the appliance will not operate, Follow the instructions “To Turn Off Gas To Appliance” and call your service technician or gas supplier.

TO TURN OFF GAS TO THE APPLIANCE

1.Set the thermostat to the lowest setting.

2.Turn off all electric power to the appliance if service is to be performed.

3.Turn the manual valve at gas inlet of appliance

clockwise to “OFF” (See Figure 16).

Figure 16. Manual Gas Valve.

TG-199E-N(X), TG237E-N(X), TG-180E-N(X), TG-150E-N(X), TG-237E-N(X)A specifications

Bradford White Corporation is renowned for its innovative solutions in the water heating and storage sector, offering a range of high-quality products designed for residential and commercial applications. Among its standout offerings are the TG series models, including TG-237E-N(X)A, TG-150E-N(X), TG-180E-N(X), TG-237E-N(X), and TG-199E-N(X). These models are specifically designed to maximize efficiency while providing reliable hot water delivery.

One key feature of the TG series is its high Energy Factor (EF) ratings, which signify exceptional energy efficiency. The models employ advanced technologies that not only reduce energy consumption but also minimize environmental impact. These products typically include a highly efficient burner system that enhances heat transfer, ensuring that users enjoy maximum hot water availability without incurring high utility costs.

Each model is crafted with robust materials, designed to withstand the rigors of everyday use. For example, the tanks are typically built from durable steel and feature an advanced glass lining that protects against corrosion and extends the lifespan of the unit. Additionally, these models are equipped with high-quality insulation that helps retain heat, further improving efficiency.

The TG series also emphasizes user convenience and safety. Many units come with a user-friendly control system that allows for easy temperature adjustments and monitoring. This is complemented by built-in safety features such as automatic shut-off capabilities, helping to prevent overheating or other potential hazards.

Another characterizing aspect of the TG series is its flexibility in installation. These water heaters are designed to fit various spaces and configurations, ensuring that they can meet the needs of different households or commercial facilities. Additionally, some models are compatible with both natural gas and propane, offering versatility in fuel options.

In terms of technology, these Bradford White water heaters include features such as electronic gas control systems that provide precise temperature management, and advanced airflow designs that optimize combustion efficiency. This focus on technology ensures that the TG series is not only reliable but also a smart choice for cost-conscious consumers looking to reduce their energy bills.

In summary, the Bradford White TG series, with models like TG-237E-N(X)A, TG-150E-N(X), TG-180E-N(X), TG-237E-N(X), and TG-199E-N(X), stands out for its robust design, efficiency, and advanced safety features. Whether for residential or commercial use, these hot water solutions continue to meet the evolving needs of consumers while prioritizing reliability and performance.