Genie 3531835447 installation instructions FfT£Ck¢ D4 FG SCY L AS, Model Number

NOTE

o Loosen (Do Not Remove) Terminal Block Screws_

o Limit Switch adjustments and securing the Wires will be done later.

FLay Wires in channel on top of Rail and secure with Wire Clips (Figure 14).

GCoil and bundle excess Limit Switch Wires on top of Power Head with Twist Ties. Leave just enough Wire to reach Terminals on back of Power Head (Figure 14).

HTurn Opener upside down, and connect Limit Switch Wires to Power Head Terminal Block (Figure lS):

•Terminal 4: OPEN Limit Switch Wire (white).

•Terminal 5: OPEN Limit Switch Wire (white) and CLOSE Limit Switch Wire (brown).

•Terminal 6: CLOSE Limit Switch Wire (brown).

_ffT'£Ck¢ _D4 F_G _SCY_ L AS

ATie overhand knot at one end of Emergency Release Cord.

BThread opposite end of Cord through Knob and hole in Magnetic Carriage Assembly Release Lever (Figure 16).

CTie overhand knot at this end of Emergency Release Cord.

DAttach Emergency Release Tag to Magnetic Carriage Assembly Release Lever.

Please note the following information so it is available if you need to call us:

Date purchased: / /

Serial number (Figure 17):

Model number (Figure 17):

Dealer Name:

Dealer Address:

City:

State:

Zip:

Phone:

NOTE

Please keep original or photocopy of your sales receipt with this manual for future reference should service ever be

required.

Antenna

Terminal	White	Limit	Brown	Limit
Block	Switch	wires	Switch	wires

Figure 15 Connect Limit Switch Wires to Power Head Terminal Block

Emergency

Release Knob

®

Figure 16 Attach Emergency Release Cord/Knob

and Tag

Model

Number

Serial

Number

WK YR PI

(example) 01 02 4E

Figure 17 Model and Serial Numbers