Genie 3531835447 Moving door can cause serious injury or death, Pressin order

Page 23

WARNING

A Moving door can cause serious injury or death.

1 Keep people clear of opening while door is moving.

2Do Not allow children to play with Wireless Keypad.

3During programming, the door opener could begin to run, so stay away from the moving door and its parts.To keep the door from moving, dose the door and disconnect it from the Openerby pulling the Emergency Release.

If Safety Reverse does not work properly

1 Close door and disconnect the Opener using Emergency Release Cord.

2 Do not use door Opener, Remote Controls, or Wireless Keypad.

3 Refer to Door and Door Opener Owner's Manuals before attempting any repairs.

NOTE

FOR CONVENIENCE--Program Keypad BEFOREmounting.

ASet Wireless Keypad PIN (Personal ID Number):

•Activate programming mode.

-Press (in order)

-Red LEDblinks - once per second.

oEnteryour PIN(3to 8 characters).

oPress

RedLEDblinks-twice persecondandturnsoff.

Programming One Door Operator:

Figure 1

 

•Find the Learn Code Button and Learn Code

Indicator LEDon your door opener.

Indicator

 

-

Ifyour door opener has a black antenna

 

 

wire,the Learn Code Button and Indicator

 

 

LEDare located near the antenna.

 

 

(The light lens may need to be opened)

 

-

Ifyour door opener doesnot have an

 

 

antenna, you have an external receiver.

 

 

The external receiver cover must be

 

 

removed to accessthe Learn Code

 

 

Button and Indicator LED.

Lea rnj_

•

Pressthe Learn Code Button.

Code--

-

LearnCode Indicator LED(on Opener)

Button

 

will blink.

Enteryour PINand press _.

-Learn Code Indicator LEDstays on.

• Press_

again.

-Learn Code Indicator LEDturns off.

COperating One Door Operator:

•To move the garage door:

-Enteryour PIN.

-PressC@.

NOTE

eIf the door does not move, check the red LED on Keypad. If the LED is blinking rapidly,the PINwas entered incorrectly. After the LEDstops blinking, re-enter your PINand try again.

Any keypad button will control the door for 30 seconds after the door starts moving.

Rapid Blinking of the red LEDindicates an error. After afew seconds the LEDwill turn off. Start over.

ASet Wireless Keypad PIN (Personal ID Number): Activate programming mode.

-

Press(in order)

)).

-Red LEDblinks - once per second.

•Enteryour PIN (3to 8 characters).

• Press )).

-Red LEDblinks- twice per second and turns off. B Programming the Keypad for Multiple Door openers:

•

Enteryour PIN and press

}.

-Red LEDblinks - once per second.

• Press again.

- Red LEDblinks - twice per second.

•Pressthe number of doors (total) you wish to control (@ or @).

• Press ).

-Red LEDblinks several times and turns off.

C Programming Door Openers:

Decide which door will be door #1,#2 and #3.

Pressthe Learn Code Button (see Figure 1).

-Learn Code Indicator LED(on Opener) blinks.

•Enteryour PIN and press _.

-Learn Code Indicator LEDstays on.

Pressthe number you have picked for this

door Opener(@ or @ or @).

-Learn Code Indicator LEDstays on.

"Press _.

-Learn Code Indicator LEDturns off,

BRepeat step A above for each door opener,

Eachdoor opener must be programmed to receive the signal from the Wireless Keypad,

oi _

;5 0

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Please have Model information ready when calling MaintenanceWiring Diagram Warranty Information Highspringtension Automatic Lighting SystemAre under extreme tension and can cause Seriousinjury or deathSectional Door Rail Extension for 8doorFinished Ceilings Permanent wiring must be installed by a LicensedMounting Straps Angle iron not includedFloor Part Name Part Name Quantity RequiredRail Assembly 1 piece Hol Packaged separately Hardware blue bag @ JfiHardware green bag Rail StrapModel Number FfT£Ck¢ D4 FG SCY L ASHardware orange bag + 2-1/2 sectional door orFinger-tighten until later RailAngle iron not included Sectional DoorsOpen Beam Ceiling Examples Finished Ceilings Door Arm Hardware yellow bagAs long as possible DoorArm Electrical Warning Hardware red bag Appro112Terminal Attachment Terminal Attachment At Wall ConsoleCosscssGovv IC \\ Carriage Switch5elX@ of Limt 5w t@s Checking Contact Reverse @@@ Pressin order If Safety Reverse does not work properlyMoving door can cause serious injury or death RedLEDblinks-twice persecondandturnsoffSeeFigure Closedoor MonthlyLED BLINKS, PauseRepeat Blinks You SeePause SblinksCheck condition of garage door and door springs ProblemSecondaryground Primary GroundWoGet b How to Get Waaty......@ , ¢@Wlat is Coved Stuctio,sCommasdast GPS-5 GIT-1

3531835447 specifications

The Genie 3531835447 is a state-of-the-art aerial work platform designed to elevate productivity in various industries. With its innovative features, cutting-edge technologies, and user-friendly characteristics, this machine stands out as a reliable solution for reaching heights safely and efficiently.

One of the main features of the Genie 3531835447 is its impressive lifting capacity. The machine is engineered to support a robust load, allowing operators to carry tools and materials while working at significant heights. The platform can lift personnel to an impressive reach, making it suitable for construction sites, maintenance work, and industrial applications.

Another notable characteristic of the Genie 3531835447 is its compact design. This versatility enables it to maneuver easily in tight spaces, making it ideal for indoor applications or crowded job sites. Its narrow width and compact footprint allow operators to navigate confined areas without compromising stability or safety.

Safety is paramount in aerial work platforms, and the Genie 3531835447 is equipped with an array of advanced safety features. These include automatic leveling systems that ensure the platform remains stable regardless of the ground conditions. Additionally, the machine has emergency lowering systems that provide peace of mind to operators in case of power failure.

The Genie 3531835447 employs advanced technologies to enhance operational efficiency. These technologies include intelligent diagnostics that monitor performance and alert users about potential maintenance needs. This proactive approach minimizes downtime and maintenance costs while extending the lifespan of the equipment.

The platform also features an intuitive control system. Operators can easily manage the machine's functions, such as lifting and lowering, using simple joystick controls. This user-friendly design ensures that even less experienced users can operate the platform effectively.

Furthermore, energy efficiency is a defining characteristic of the Genie 3531835447. With options for electric or hybrid power sources, users have the flexibility to choose the most suitable power solution for their needs while minimizing environmental impact.

In summary, the Genie 3531835447 is a robust and efficient aerial work platform that combines impressive lifting capabilities, a compact design, advanced safety features, and intelligent technologies. Whether in construction, maintenance, or industrial applications, this machine is engineered to elevate productivity and safety to new heights.
Top Page Image Contents