Genie 3531835447 installation instructions Checking Contact Reverse

Page 21

NOTE

eTo protect your new investment, your Excelerator ® is equipped with a Timer and Cycle Counter which work together to prevent any chance of heat damage to electrical circuits caused by too many cycles in too short a time. If your Opener suddenly stops responding to the Wall Console- Do Not Unplug the Unit- simply wait

10 minutes for the Timer/Cycle Counter to reset itself and try again.

Unplugging the unit will prevent the Timer/Cycle Counter from resetting.

DTest Door Opener:

•Run door up and down a few times using Wall Console and observe door travel.

•Repeat steps above as needed to set Limit Switch positions.

EAdjust Open Force to minimum needed:

•Place door in closed position using Wall Console.

•Gently adjust Open Force fully counterclockwise (minimum force).

•Run Opener using Wall Console.

•Observe that door runs to Open Limit Switch.

-If not, adjust Open Force Control slightly clockwise, close garage door, and open it again.

•Repeat steps above until garage door runs smoothly from Close Limit Switch to Open Limit Switch.

FAdjust Close Force to minimum needed:

•Place door in open position using Wall Console.

•Gently adjust Close Force fully counterclockwise (minimum force).

•Run Opener using Wall Console.

•Observe that door runs to Close Limit Switch.

-If not, adjust Close Force Control slightly clockwise, open garage door, and close it again.

. Repeat steps above until garage door runs smoothly from Open Limit Switch to Close Limit Switch.

c _°-= _ =_¢_=_c =_

NOTE

Limit Switch and Force Adjustments must be completed before checking the contact reverse function (Figure 38).

AOpen garage door using Wall Console.

BLay a 2" x 4" board flat in center of doorway.

CClose door using Wall Console.

DCheck that door stops and reverses within 2 seconds after it contacts board:

o If door does not reverse, decrease Close Force until door reverses.

o If door still does not reverse, move Limit Switch toward door.

ECheck Safe-T-Beam ® System operation:

o If beam is blocked, door will not close.

NOTE

The door must contact the 2"x 4" board before the

Carriage activates the Close Limit Switch. If not, readjust the Close Limit Switch.

2" x 4" board laid flat

Figure 36 Checking Contact Reverse

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Maintenance Wiring Diagram Warranty InformationPlease have Model information ready when calling Highspringtension Automatic Lighting SystemAre under extreme tension and can cause Seriousinjury or deathSectional Door Rail Extension for 8doorMounting Straps Permanent wiring must be installed by a LicensedAngle iron not included Finished CeilingsFloor Part Name Part Name Quantity RequiredRail Assembly 1 piece Hol Packaged separately Hardware blue bag @ JfiHardware green bag Rail StrapModel Number FfT£Ck¢ D4 FG SCY L ASHardware orange bag + 2-1/2 sectional door orFinger-tighten until later RailSectional Doors Open Beam Ceiling Examples Finished CeilingsAngle iron not included Hardware yellow bag As long as possible DoorArmDoor Arm Electrical Warning Hardware red bag Appro112Terminal Attachment Terminal Attachment At Wall ConsoleCosscssGovv Carriage Switch 5elX@ of Limt 5w t@sIC \\ Checking Contact Reverse @@@ Moving door can cause serious injury or death If Safety Reverse does not work properlyRedLEDblinks-twice persecondandturnsoff Pressin orderSeeFigure Closedoor MonthlyBLINKS, Pause RepeatLED Pause You SeeSblinks BlinksCheck condition of garage door and door springs ProblemSecondaryground Primary GroundHow to Get Waaty......@ , ¢@ Wlat is CovedWoGet b Stuctio,sCommasdast GPS-5 GIT-1

3531835447 specifications

The Genie 3531835447 is a state-of-the-art aerial work platform designed to elevate productivity in various industries. With its innovative features, cutting-edge technologies, and user-friendly characteristics, this machine stands out as a reliable solution for reaching heights safely and efficiently.

One of the main features of the Genie 3531835447 is its impressive lifting capacity. The machine is engineered to support a robust load, allowing operators to carry tools and materials while working at significant heights. The platform can lift personnel to an impressive reach, making it suitable for construction sites, maintenance work, and industrial applications.

Another notable characteristic of the Genie 3531835447 is its compact design. This versatility enables it to maneuver easily in tight spaces, making it ideal for indoor applications or crowded job sites. Its narrow width and compact footprint allow operators to navigate confined areas without compromising stability or safety.

Safety is paramount in aerial work platforms, and the Genie 3531835447 is equipped with an array of advanced safety features. These include automatic leveling systems that ensure the platform remains stable regardless of the ground conditions. Additionally, the machine has emergency lowering systems that provide peace of mind to operators in case of power failure.

The Genie 3531835447 employs advanced technologies to enhance operational efficiency. These technologies include intelligent diagnostics that monitor performance and alert users about potential maintenance needs. This proactive approach minimizes downtime and maintenance costs while extending the lifespan of the equipment.

The platform also features an intuitive control system. Operators can easily manage the machine's functions, such as lifting and lowering, using simple joystick controls. This user-friendly design ensures that even less experienced users can operate the platform effectively.

Furthermore, energy efficiency is a defining characteristic of the Genie 3531835447. With options for electric or hybrid power sources, users have the flexibility to choose the most suitable power solution for their needs while minimizing environmental impact.

In summary, the Genie 3531835447 is a robust and efficient aerial work platform that combines impressive lifting capabilities, a compact design, advanced safety features, and intelligent technologies. Whether in construction, maintenance, or industrial applications, this machine is engineered to elevate productivity and safety to new heights.
Top Page Image Contents