Audi AUD-S specs

18OPERATION AND ADJUSTMENT INSTRUCTIONS CLUTCH ADJUSTMENT

WARNING

RISK OF ENTRAPMENT THAT MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH. DISCONNECT POWER TO THE OPENER BEFORE SERVICING OR MAKING ADJUSTMENTS. ENSURE DOORWAY IS CLEAR BEFORE STARTING TESTING OF OPERATOR.

The fiber disk will wear during normal operation and should be replaced when it becomes difficult or impossible to sufficiently tighten the clutch to obtain smooth operation of the door when it is in good working condition. To replace the fiber disk, first loosen the motor mounting bolts and remove the V-belt then the clutch adjusting nuts, spring and clutch pulley. Check condition of V-belt before reassembly and replace if required. After reassembly, adjust clutch as described above.

The clutch serves to protect the door, the electric operator and other equipment from undue stress or damage caused by starting forces and/or an obstruction to the door. It should be set no tighter than is necessary to smoothly and consistently move the door throughout its full range of travel. When properly set, it will slip freely if the door should encounter an obstruction, and it should be possible to stop the travel of the door by hand.

WARNING: Before adjustment remove power to the operator.

To adjust the clutch, loosen the jamb nut, , and turn the adjusting nut, as shown at right Make adjustments in 1/4 turn increments. Always re-tighten the jamb nut before running the operator to prevent clutch from changing its setting.

CAUTION

NEVER COMPRESS CLUTCH SPRING BEYOND

POINT LIMITED BY THE DESIGN OF THE OPERATOR OR REPLACE IT WITH A HEAVIER SPRING

Due to changing conditions of the door and normal wear, it may be necessary to occasionally readjust the clutch to obtain dependable operation.

WARNING: BEFORE DOING SO BE CERTAIN THAT THE DOOR IS IN GOOD WORKING CONDITION, PROPERLY COUNTERBALANCED AND THAT THE CLUTCH IS NOT SLIPPING BECAUSE OF LOOSE OR MISSING HARDWARE, BINDING IN THE TRACK, RUBBING AGAINST THE DOOR STOPS OR DEFECTIVE OR MISADJUSTED SPRINGS. ANY SERVICE REQUIRED TO THE DOOR, DOOR SPRINGS OR DOOR OPERATOR MUST BE PREFORMED BY A QUALIFIED PROFESSIONAL DOOR INSTALLER.

107101

Figure 23

WARNING

IMPROPER ADJUSTMENT OF CLUTCH SETTING COULD CAUSE ENTRAPMENT, INJURY OR DEATH.

SET CLUTCH ADJUSTMENT FOR JUST ENOUGH FORCE TO OPERATE THE DOOR RELIABLY, BUT NO STRONGER. Contact a service professional to correct any binding, sticking or other door problems. DO NOT OVER-ADJUST CLUTCH SETTING TO COMPENSATE FOR A POORLY WORKING DOOR.

AUD-S specifications

The Audi AUD-S is a striking representation of the brand's commitment to performance, luxury, and cutting-edge technology. Tailored for enthusiast drivers who crave a high-performance vehicle without sacrificing daily usability, the AUD-S harmonizes style and function in a captivating package.

One of the standout features of the AUD-S is its robust powertrain. Typically powered by a turbocharged V6 or V8 engine, the AUD-S is engineered to deliver exhilarating performance that pushes the boundaries of what drivers expect from a luxury sedan. With power output often exceeding 400 horsepower, the AUD-S can accelerate from 0 to 60 mph in a matter of seconds, offering a thrilling driving experience both on the track and the open road.

The AUD-S employs Audi's renowned quattro all-wheel-drive system, which enhances traction and stability in various driving conditions. This advanced system ensures that power is efficiently distributed to all four wheels, providing superior grip during acceleration and cornering, making the AUD-S a driver-focused vehicle that inspires confidence behind the wheel.

In terms of design, the AUD-S boasts an aggressive stance complemented by sleek lines and distinctive aerodynamic enhancements. Its bold front grille and sharp LED headlights not only contribute to its eye-catching appearance but also improve airflow and overall performance. The spacious interior is adorned with high-quality materials, including leather upholstery and aluminum or carbon fiber accents, providing an atmosphere of sophistication and luxury.

Technology in the AUD-S is state-of-the-art, featuring the latest version of Audi’s MMI infotainment system. The system provides intuitive controls for navigation, audio settings, and vehicle monitoring, ensuring that drivers stay connected while remaining focused on the road. A fully digital instrument cluster, known as the Virtual Cockpit, presents vital information in a crisp and customizable format.

Safety and driver assistance features are also a priority in the AUD-S. Equipped with various sensors and cutting-edge camera technology, the vehicle offers features such as adaptive cruise control, lane-keeping assist, and parking assistance, all designed to enhance safety and convenience behind the wheel.

In summary, the Audi AUD-S embodies the perfect blend of power, luxury, and technology. With its impressive performance capabilities, sophisticated design, and advanced features, the AUD-S stands out as a top contender in the high-performance luxury sedan market, offering an unparalleled driving experience for those who seek both excitement and elegance.