Audi AUD-S owner manual Component Identification Listing, Item # PART# Description Quan

Page 5

 

 

5

IMPORTANT INSTALLATION WARNINGS

 

 

 

 

 

 

TO REDUCE THE RISK OF SEVERE INJURY WARNING OR DEATH: READ AND FOLLOW ALL

INSTALLATION INSTRUCTIONS!

Install only on a properly balanced garage door. An improperly balanced door could cause severe injury. Have a qualified service person make repairs to cables, spring assemblies and other hardware before installing the opener.

Remove all ropes and remove or make inoperative all locks (unless mechanically and/or electrically interlocked to the power unit) that are connected to the garage door before installing the opener.

Lightweight doors (fiberglass, aluminum etc.) must be reinforced to avoid door damage. Check the door manufacturer’s instruction manual for a bracing procedure or the availability or a Reinforcement Kit. See Page 9.

Model AUD-S is a Commercial Vehicular Door Operator and as such IS NOT recommended for pedestrian traffic. In installations where it is known that pedestrians will be nearby ensure a pedestrian door is available for entrance and exit to the building. In addition YOU MUST install an auxiliary entrapment protection device (reversing door edge or photoelectric beam device).

Connect an auxiliary entrapment protection device (reversing edge or photoelectric device across the door opening). a device of this type is

STRONGLY ADVISED FOR ALL commercial operator installations. An auxiliary entrapment protection device is REQUIRED when the three button control station is out of sight of the door or any other automatic or manual control is used.

Install the opener at least 8 feet or more above the floor.

Do not connect the opener to the source of power until instructed to do so.

Locate the control station:

a)within sight of the door and;

b)at a minimum height of five feet above the floor and;

c)away from all moving parts of the door.

Do not overtighten the clutch adjustment to compensate for a poorly working door.

Securely attach any WARNING signs or placards to either the door or above the control station as directed.

After installing the opener, all safety features must be tested for proper operation (see page 19).

COMPONENT IDENTIFICATION LISTING

ITEM #

PART#

DESCRIPTION

QUAN.

ITEM #

PART#

DESCRIPTION

QUAN

 

 

 

 

 

 

 

 

 

1

 

Operator Power Head

1

18

005031

3 Button Station

1

2

 

Track Rails

2

19

100513

Release Door Arm

1

7

006031

3/8-16 Keps Hex Nut

6

20

100236

Extension Door Arm

2

8

101315

3/8 - 16 X 6-1/2 Hex Head Blot

1

21

100235

Curved Door Arm

1

9

107049

Track Bracket

AR

22

100108

Door Bracket

1

10

006034

1/2 - 15 Hex Nut

2

23

100469

Hardware Pkg Com. Door Arm

1

11

006049

1/2 Split Lockwasher

2

26

 

3/8 - 16 X 2-1/2 Carriage Bolt

2

12

106265

Front Idler Assembly

1

16

 

3/8 - 16 X 1 Hex Head Bolt

1

13

 

Chain For Track Rail

1

27

 

3/8 Nylon Insert Locknut

1

14

 

3 Piece Chain Connecting Link

1

28

 

5/16 - 18 X 1-1/4 Hex Head Bolt

4

15

006084

Chain Tension Adjustment Bolt

1

29

 

5/16 - 18 Keps Hex Nuts

4

16

006031

3/8 - 16 Keps Hex Nut

2

25

100468

Hardware Pkg Com. Track Assy

1

17

100512

Track Trolley

1

4

 

3/8 - 16 Hex Nut

AR

 

 

 

 

 

5

 

3/8 Split Lockwasher

AR

—— AR - As Required

 

 

6

 

3/8 - 16 X 1-1/2 Hex Head Bolt

AR

 

 

 

 

 

 

 

 

 

Image 5
Contents AUD-S Table of Contents Standard Features Product FeaturesComponent Identification Pictorial 4PREPARATIONItem # PART# Description Quan Component Identification ListingRAIL/CHAIN Assembly RAIL/CHAIN Assembly Instructions107096 107094 SPRINGS, PULLEYS, Cables and Mounting Hardware Used to Details a typical method of hanging the operator Electrical Wiring Instructions Door Edge and Photoelectric Wiring Pneumatic Door Edge Installation Field WiringTurning on the Power to the Operator 12 3/SINGLE Button Station / Interlock Field WiringDeath Read and Follow ALL Instructions Settable Switches Location Setup Modes Operation and Adjustment InstructionsMid-Stop Limit Setup Brake AdjustmentLimit Assembly Operation and Adjustment Instructions Clutch Adjustment Maintenance Operation and Adjustment Instructions TestingLoad Wiring DIAGRAM/SCHEMATIC Single PhaseLoad Wiring DIAGRAM/SCHEMATIC Three PhaseOperator Dimensions Operator Dimensions / NotesDescription Parts IdentificationManufacturer’s Limited Warranty

AUD-S specifications

The Audi AUD-S is a striking representation of the brand's commitment to performance, luxury, and cutting-edge technology. Tailored for enthusiast drivers who crave a high-performance vehicle without sacrificing daily usability, the AUD-S harmonizes style and function in a captivating package.

One of the standout features of the AUD-S is its robust powertrain. Typically powered by a turbocharged V6 or V8 engine, the AUD-S is engineered to deliver exhilarating performance that pushes the boundaries of what drivers expect from a luxury sedan. With power output often exceeding 400 horsepower, the AUD-S can accelerate from 0 to 60 mph in a matter of seconds, offering a thrilling driving experience both on the track and the open road.

The AUD-S employs Audi's renowned quattro all-wheel-drive system, which enhances traction and stability in various driving conditions. This advanced system ensures that power is efficiently distributed to all four wheels, providing superior grip during acceleration and cornering, making the AUD-S a driver-focused vehicle that inspires confidence behind the wheel.

In terms of design, the AUD-S boasts an aggressive stance complemented by sleek lines and distinctive aerodynamic enhancements. Its bold front grille and sharp LED headlights not only contribute to its eye-catching appearance but also improve airflow and overall performance. The spacious interior is adorned with high-quality materials, including leather upholstery and aluminum or carbon fiber accents, providing an atmosphere of sophistication and luxury.

Technology in the AUD-S is state-of-the-art, featuring the latest version of Audi’s MMI infotainment system. The system provides intuitive controls for navigation, audio settings, and vehicle monitoring, ensuring that drivers stay connected while remaining focused on the road. A fully digital instrument cluster, known as the Virtual Cockpit, presents vital information in a crisp and customizable format.

Safety and driver assistance features are also a priority in the AUD-S. Equipped with various sensors and cutting-edge camera technology, the vehicle offers features such as adaptive cruise control, lane-keeping assist, and parking assistance, all designed to enhance safety and convenience behind the wheel.

In summary, the Audi AUD-S embodies the perfect blend of power, luxury, and technology. With its impressive performance capabilities, sophisticated design, and advanced features, the AUD-S stands out as a top contender in the high-performance luxury sedan market, offering an unparalleled driving experience for those who seek both excitement and elegance.