Harman-Kardon DPR 1005 owner manual Menu system

Page 38

ADVANCED FEATURES

To adjust the on-screen appearance of the semi-OSD

system, press the OSD Button to bring the MASTER MENU to the screen. Press the ¤ Navigation Button o, until the on-screen ➔ cursor is next to the ADVANCED line. Press the Set Button q to enter the ADVANCED SELECT menu.

When the ADVANCED SELECT menu appears, press the ⁄/¤ Navigation Button o so that the on-screen➔ cursor is pointing to the SEMI OSD/TIME OUT line. Select one of these options:

•To keep the semi-OSD system activated, but to adjust the length of time the displays remain on the screen, press the ‹/› Navigation Button o until the desired time-out is shown. The default setting is 5 seconds.

•To turn the semi-OSD system off so that it does not appear at any time, press the ‹/› Navigation Button o so that OFF is shown on the right side of the line.

If you wish to make other adjustments, press the

⁄/¤ Navigation Button o until the on-screen ➔ cursor is next to the desired setting or the BACK TO MASTER MENU line and press the Set Button q. If you have no other adjustments to

make, press the OSD Button to exit the menu system.

Full-OSD Time-Out Adjustment

The FULL OSD menu system is used to simplify the setup and adjustment of the DPR 1005 by using a series of on-screen menus. The factory default setting for these menus leaves them on the screen for 20 seconds after a period of inactivity before they disap- pear from the screen (Time-Out). Time-Out is a safety measure to prevent image retention of the menu text in your monitor or projector, which might happen if it were left on indefinitely. However, some viewers may prefer a slightly longer or shorter period before the on-screen display disappears.

To change the full-OSD Time-Out, you will need to make an adjustment in the ADVANCED SELECT menu (Figure 16). To start the adjust-

ment, press the OSD Button to bring the MASTER MENU to the screen. Press the ¤

Navigation Button o, until the on-screen ➔ cursor is next to the ADVANCED line. Press the Set Button q to enter the ADVANCED SELECT menu (Figure 16).

At the ADVANCED SELECT menu (Fig. 16) make certain that the on-screen ➔ cursor is next to the FULL OSD TIME OUT line by pressing the ⁄/¤ Navigation Button o as needed. Next, press the ‹/› Navigation Button o until the desired time is displayed in seconds. Unlike most of the other options in this menu, this is a permanent setting change, and the Time-Out entry will remain in effect until it is changed, even if the unit is turned off.

If you wish to make other adjustments, press the ⁄/¤ Navigation Button o until the on-screen

➔cursor is next to the desired setting or the BACK TO MASTER MENU line and press the Set Button q. If you have no other adjust-

ments to make, press the OSD Button

to exit

the menu system.

 

38 ADVANCED FEATURES

Page 37 Page 39
Image 38
Page 37 Page 39
Contents DPR Digital Path ReceiverDPR 1005 Digital Path Receiver See trademark acknowledgements onThank You for Choosing Harman Kardon Description and FeaturesIntroduction Modèle pour les CanadienSafety Information Important Safety InformationStandby/On Indicator This indicator is amber To choose from the various mode optionsSurround Mode Indicators Modes, and then press the Surround Mode SelectorFRONT-PANEL Controls AB C D E F G H J I K REAR-PANEL Connections ‚ CD Audio Inputs Connect these jacks to REAR-PANEL Connections Program Button Main Remote Control FunctionsVolume Up/Down Buttons SPL Select Button EzSet Microphone Sensor LensChannel Up/Down Selector . To raise Have been pressedSpeaker Select Button Press this button Main Remote Control Functions Zone II Remote Control Functions Installation and Connections System InstallationSystem and Power Connections RS-232 Connections BUSInstallation ConnectionsAC Power Connections System Setup System ConfigurationSpeaker Placement Speaker Selection and PlacementSetting the System Configuration Memory Input SetupMaking Configuration Adjustments For DVD and the Optical Digital Input 1 ‡› Navigation Button o Cursor is next to the REC OUT line, pressFor added resolution Audio SetupSurround Setup Speaker OptimizerTo return to the Master Menu Speaker Setup DTS-ES Discrete. Press the ‹/› Navigation ButtonSet the unit for either 5.1 or 6.1/7.1 operation Measurement units is made, press the ⁄/¤ Delay SettingsTo bring up the Master Menu and press Navigation Button o to return the cursor to the FL position Output Level AdjustmentUsing EzSet To change one of the individual speaker positionsMENU, press the OSD Button to bring up Manual Output Level AdjustmentUsing the EzSet remote Play shown in FigureAdditional Input Adjustments To return to normal operation of the DPRBasic Operation Volume and Tone ControlOperation Source SelectionDigital Audio Playback Surround Mode SelectionDolby Mode Select Button or Digital DTS Neo6Surround Mode Chart Hdcd Playback Selecting a Digital SourcePCM Playback MP3 Audio Playback Speaker/Channel IndicatorsNight Mode Front-Panel Connections Tuner OperationTape Recording Menu system Dim Function Output Level Trim AdjustmentMemory Backup Ments to make, press the OSD ButtonMenu system Semi-OSD Settings Advanced FeaturesMenu system Turn-On Volume Level Button is pressed is shownMenu system Multiroom Operation Multiroom SetupInstallation RS-232 ControlSpecific source Multiroom OperationButtons ç∂d OutputRemote’s Main Menu message Configuring the RemoteProgramming Remote Codes Be used Learning CommandsBottom line Input Selector Button d that was justCommands from another device’s remote into the DPR remote Changing DevicesMacro Programming Macro. The choices are the Power On ButtonRemember that when you want to change devices Lower line of the display and then press the Set Button qErasing a Macro Power On VID 2/TV VID 3/Cable DPR Logic 7 hProgrammed e.g., the Power On Button 1 or Read a MacroChannel Punch-Through Punch-Through ConfigurationVolume Punch-Through EzSet Configuration When the red light under the Set Button q appearsRenaming a Device RenamingPages 27 Numeric KeysAt this point you have two options Resetting the RemoteRenaming Individual Keys Additional Notes on Configuring and Operating the Remote Troubleshooting Guide Processor ResetDPR 1005 Technical Specifications

DPR 1005 specifications

The Harman-Kardon DPR 1005 is a remarkable piece of audio technology that has gained a loyal following among home theater enthusiasts. Launched as part of Harman-Kardon's digital receiver line, it combines sophisticated features with outstanding sound quality, making it an ideal choice for both music lovers and cinephiles.

One of the standout characteristics of the DPR 1005 is its powerful 7.1-channel amplifier, delivering an impressive 75 watts per channel. This configuration enables robust sound for both stereo and surround sound applications, ensuring that users can enjoy their favorite media with rich detail and clarity. The receiver is capable of decoding a variety of surround sound formats, including Dolby Digital, DTS, and more, allowing for an immersive auditory experience that enhances movie nights and music sessions alike.

The DPR 1005 integrates advanced digital processing technologies, including Harman-Kardon’s proprietary Logic 7 processing. This technology is crucial for creating a wide soundstage and providing a genuine multichannel experience from stereo sources. Furthermore, the receiver features a built-in AM/FM tuner, allowing users to easily access their favorite radio stations.

Connectivity is another strong suit of the DPR 1005. It comes equipped with multiple inputs and outputs, including HDMI ports, composite video, and S-Video connections, which facilitate seamless connection to a variety of devices such as Blu-ray players, gaming consoles, and set-top boxes. Additionally, it features an audio return channel via HDMI, which simplifies the connection to televisions, enabling an easy setup for both audio and video.

For those who appreciate fine-tuning their audio experience, the DPR 1005 offers an array of customizable sound settings. The receiver provides various equalization options and allows users to tailor the audio output to suit their preference and room acoustics. The on-screen menu is user-friendly, making adjustments straightforward even for those who may not be tech-savvy.

A noteworthy design element of the DPR 1005 is its sleek and modern aesthetic, fitting effortlessly within any home entertainment center. The display is clear and informative, ensuring easy navigation and control.

In summary, the Harman-Kardon DPR 1005 is a versatile and high-performance digital receiver that combines cutting-edge technologies with excellent sound quality. With its powerful amplification, advanced processing capabilities, and connectivity options, it stands as a formidable choice for those seeking an enhanced audio and visual experience. Its design and user-friendly features further solidify its position as a valuable addition to any home entertainment system.
Top Page Image Contents