Harman-Kardon DPR 1005 owner manual Ab C D E F G H J I K

Page 7

FRONT-PANEL CONTROLS

AB C D E F G H J I K

NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this product at www.harmankardon.com.

The following controls and jacks are located behind the front-panel door. To open the door, press the center of the door and gently swing it down towards you.

AMain Power Switch B Tone Mode Button

C Speaker Selector Button D Channel Adjust Selector

AMain Power Switch: Press this switch to apply power to the DPR 1005. When the switch is pressed in, the unit is placed in a Standby mode, as indicated by the Standby/On Indicator 1 turning amber. The switch MUST be pressed in to operate the unit. To turn the unit off and prevent the use of the remote control, this switch should be pressed until it pops out from the front panel so that the word “OFF” may be read at the top of the switch.

NOTE: This switch is normally left in the “ON” position.

BTone Mode Button: This button controls the tone mode settings, enabling adjustment of the bass and treble boost/cut. You may also use it to take the tone controls out of the signal path completely for “flat” response. The first press of the button displays a TONE MODE message in the Lower Display Line & and in the on-screen display. To take the controls out of the signal path, press either of the ¤/⁄ Buttons ! until the display reads TONE OUT. To change the bass or treble settings, press the button again until the desired option appears in the Lower Display Line & and in the on-screen display and then press either of the ‹/› Buttons ! to enter the desired boost or cut setting. See page 30 for more information on the tone controls.

CSpeaker Selector Button: Press this button to begin the process of configuring the DPR 1005 for the type of speakers it is being used with. For com- plete information on configuring the speaker settings, see page 24.

EDigital Input Selector F Delay Adjust Selector G Headphone Jack H Optical 3 Digital Input

DChannel Adjust Selector: Press the button to begin the process of adjusting the channel level out- puts using the source currently playing through your DPR. For complete information on adjusting the chan- nel output level, see page 36.

EDigital Input Selector: Press this button to begin the process of selecting a digital source for use with the currently selected input. Once the button has been pressed, use the ¤/⁄ Buttons ! to choose the desired input and then press the Set Button ) to enter the setting into the unit’s memory. See page 31 for more information on digital audio.

FDelay Adjust Selector: Press this button to begin the process of adjusting the delay settings for Dolby surround modes. See page 26 for more information on delay adjustments.

GHeadphone Jack: This jack may be used to lis- ten to the DPR 1005’s output through a pair of head- phones. Be certain that the headphones have a stan- dard 1/4" stereo phone plug, or that you use an adapter, as needed, to convert the plug on your head- phones to the 1/4" jack used on the AVR. When the headphone jack is in use, the main room speakers will automatically be turned off and the unit will output a standard stereo signal. You may also use one of the Dolby Headphone modes for an enhanced listening experience. For more information on headphone lis- tening, see page 31.

IInput/Output Indicator J Coaxial 3 Digital Input K Video 5 Audio/Video Jacks

HOptical 3 Digital Input: Connect the optical digital output of an audio or video product to this jack.

IInput/Output Status Indicator: This LED indicator will normally light green to show that the front-panel Video 5 Input/Output Jacks K are operating as inputs. When these jacks are configured for use as an output, the indicator will turn red to show that the jacks may be used as an output for recording. (See page 35 for more information on configuring the front-panel jacks as outputs, rather than inputs.)

JCoaxial 3 Digital Input: Connect the coaxial digi- tal output of a digital audio product such as a portable audio player or video game to this jack.

KVideo 5 Input/Output Jacks: These audio/video jacks may be used as either an input or output for temporary connection to video games or portable audio/video products such as camcorders and portable audio players. (See page 35 for more information on switching these jacks between an input and output.)

FRONT-PANEL CONTROLS 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Digital Path Receiver DPRSee trademark acknowledgements on DPR 1005 Digital Path ReceiverModèle pour les Canadien Description and FeaturesIntroduction Thank You for Choosing Harman KardonImportant Safety Information Safety InformationModes, and then press the Surround Mode Selector To choose from the various mode optionsSurround Mode Indicators Standby/On Indicator This indicator is amberFRONT-PANEL Controls AB C D E F G H J I K REAR-PANEL Connections ‚ CD Audio Inputs Connect these jacks to REAR-PANEL Connections SPL Select Button EzSet Microphone Sensor Lens Main Remote Control FunctionsVolume Up/Down Buttons Program ButtonHave been pressed Channel Up/Down Selector . To raiseSpeaker Select Button Press this button Main Remote Control Functions Zone II Remote Control Functions System Installation Installation and ConnectionsSystem and Power Connections AC Power Connections BUSInstallation ConnectionsRS-232 Connections Speaker Selection and Placement System ConfigurationSpeaker Placement System SetupFor DVD and the Optical Digital Input 1 ‡ Input SetupMaking Configuration Adjustments Setting the System Configuration MemoryCursor is next to the REC OUT line, press › Navigation Button oSpeaker Optimizer Audio SetupSurround Setup For added resolutionTo return to the Master Menu DTS-ES Discrete. Press the ‹/› Navigation Button Speaker SetupSet the unit for either 5.1 or 6.1/7.1 operation To bring up the Master Menu and press Delay SettingsMeasurement units is made, press the ⁄/¤ To change one of the individual speaker positions Output Level AdjustmentUsing EzSet Navigation Button o to return the cursor to the FL positionPlay shown in Figure Manual Output Level AdjustmentUsing the EzSet remote MENU, press the OSD Button to bring upTo return to normal operation of the DPR Additional Input AdjustmentsSource Selection Volume and Tone ControlOperation Basic OperationDigital DTS Neo6 Surround Mode SelectionDolby Mode Select Button or Digital Audio PlaybackSurround Mode Chart PCM Playback Selecting a Digital SourceHdcd Playback Night Mode Speaker/Channel IndicatorsMP3 Audio Playback Tape Recording Tuner OperationFront-Panel Connections Ments to make, press the OSD Button Output Level Trim AdjustmentMemory Backup Menu system Dim FunctionButton is pressed is shown Advanced FeaturesMenu system Turn-On Volume Level Menu system Semi-OSD SettingsMenu system RS-232 Control Multiroom SetupInstallation Multiroom OperationOutput Multiroom OperationButtons ç∂d Specific sourceProgramming Remote Codes Configuring the RemoteRemote’s Main Menu message Input Selector Button d that was just Learning CommandsBottom line Be usedChanging Devices Commands from another device’s remote into the DPR remoteLower line of the display and then press the Set Button q Macro. The choices are the Power On ButtonRemember that when you want to change devices Macro ProgrammingRead a Macro Power On VID 2/TV VID 3/Cable DPR Logic 7 hProgrammed e.g., the Power On Button 1 or Erasing a MacroVolume Punch-Through Punch-Through ConfigurationChannel Punch-Through When the red light under the Set Button q appears EzSet ConfigurationNumeric Keys RenamingPages 27 Renaming a DeviceRenaming Individual Keys Resetting the RemoteAt this point you have two options Additional Notes on Configuring and Operating the Remote Processor Reset Troubleshooting GuideDPR 1005 Technical Specifications

DPR 1005 specifications

The Harman-Kardon DPR 1005 is a remarkable piece of audio technology that has gained a loyal following among home theater enthusiasts. Launched as part of Harman-Kardon's digital receiver line, it combines sophisticated features with outstanding sound quality, making it an ideal choice for both music lovers and cinephiles.

One of the standout characteristics of the DPR 1005 is its powerful 7.1-channel amplifier, delivering an impressive 75 watts per channel. This configuration enables robust sound for both stereo and surround sound applications, ensuring that users can enjoy their favorite media with rich detail and clarity. The receiver is capable of decoding a variety of surround sound formats, including Dolby Digital, DTS, and more, allowing for an immersive auditory experience that enhances movie nights and music sessions alike.

The DPR 1005 integrates advanced digital processing technologies, including Harman-Kardon’s proprietary Logic 7 processing. This technology is crucial for creating a wide soundstage and providing a genuine multichannel experience from stereo sources. Furthermore, the receiver features a built-in AM/FM tuner, allowing users to easily access their favorite radio stations.

Connectivity is another strong suit of the DPR 1005. It comes equipped with multiple inputs and outputs, including HDMI ports, composite video, and S-Video connections, which facilitate seamless connection to a variety of devices such as Blu-ray players, gaming consoles, and set-top boxes. Additionally, it features an audio return channel via HDMI, which simplifies the connection to televisions, enabling an easy setup for both audio and video.

For those who appreciate fine-tuning their audio experience, the DPR 1005 offers an array of customizable sound settings. The receiver provides various equalization options and allows users to tailor the audio output to suit their preference and room acoustics. The on-screen menu is user-friendly, making adjustments straightforward even for those who may not be tech-savvy.

A noteworthy design element of the DPR 1005 is its sleek and modern aesthetic, fitting effortlessly within any home entertainment center. The display is clear and informative, ensuring easy navigation and control.

In summary, the Harman-Kardon DPR 1005 is a versatile and high-performance digital receiver that combines cutting-edge technologies with excellent sound quality. With its powerful amplification, advanced processing capabilities, and connectivity options, it stands as a formidable choice for those seeking an enhanced audio and visual experience. Its design and user-friendly features further solidify its position as a valuable addition to any home entertainment system.
Top Page Image Contents