Harman-Kardon DPR 1005 owner manual ‚ CD Audio Inputs Connect these jacks to

Page 9

REAR-PANEL CONNECTIONS

¡Video 4 Inputs: Connect the left/right analog audio and composite or S-Video jacks of a video device to these jacks. The DPR 1005’s remote control has a satellite receiver as the default for this input, but you may connect any video source such as a VCR, HDTV receiver, personal video recorder, or other device to these inputs. Note that if the source device offers either digital audio or component video capability, those connections must be made separately, and the DPR 1005 configured accordingly. (See page 20 for more information on configuring an input for various source options.)

™Video 3 Inputs: Connect the left/right analog audio and composite or S-Video jacks of a video device to these jacks. The DPR 1005’s remote control has a cable set-top as the default for this input, but you may connect any video source such as a VCR, HDTV or satellite receiver, personal video recorder, or other device to these inputs. Note that if the source device offers either digital audio or component video capability, those connections must be made separately, and the DPR 1005 configured accordingly. (See page 20 for more information on configuring an input for various source options.)

£Video 2 Outputs: Connect the left/right analog audio and composite or S-Video RECORD/IN jacks of a video recording device such as a VCR, DVD- Recorder or personal video recorder to these jacks.

¢Video 2 Inputs: Connect the left/right analog audio and composite or S-Video PLAY/OUT jacks of a video recording device such as a VCR, DVD- Recorder or personal video recorder to these jacks. The DPR 1005’s remote control has a “TV” as the default for this input, but you may connect any video source such as a VCR, HDTV or cable set-top box, personal video recorder, or other device to these inputs. Note that if the source device offers either digi- tal audio or component video capability, those connec- tions must be made separately, and the DPR 1005 configured accordingly. (See page 20 for more infor- mation on configuring an input for various source options.)

∞Video 1 Outputs: Connect the left/right analog audio and composite or S-Video RECORD/IN jacks of a video recording device such as a VCR, DVD- Recorder or personal video recorder to these jacks.

§Video 1 Inputs: Connect the left/right analog audio and composite or S-Video PLAY/OUT jacks of a video recording device such as a VCR, DVD- Recorder or personal video recorder to these jacks.

The DPR 1005’s remote control has a VCR as the default for this input, but you may connect any video source such as a VCR, HDTV or cable set-top box, personal video recorder, or other device to these inputs. Note that if the source device offers either digi- tal audio or component video capability, those connec- tions must be made separately, and the DPR 1005 configured accordingly. (See page 20 for more infor- mation on configuring an input for various source options.)

DVD Inputs: Connect the left/right analog audio and composite or S-Video jacks of a DVD player or other video source to these jacks. When digital audio and/or component video outputs are used with a DVD player and the DPR 1005, the default connection points are the Coaxial 1 Digital Audio Input fl and the Component Video 1 Inputs i. If other jacks are used to connect a DVD player, the DPR may be reconfigured to accommodate the hookup by using the IN/OUT SETUP menu as shown on page 21.

•Video Monitor Outputs: Connect these jacks to the composite or S-Video input of a TV monitor or video projector to view the on-screen menus and the output of any standard video source selected by the receiver’s video switcher. Note that if both standard composite and S-Video sources are used, you must make connections from both Video Monitor Output jacks to your video display. In addition, if component video sources are used, you must also connect the Component Video Outputs k to the video display.

ªMultiroom Outputs: Connect these jacks to the optional external audio power amplifier and video dis- tribution system that delivers the source selected for multizone distribution.

‚CD Audio Inputs: Connect these jacks to the

left/right analog audio output of a compact disc player or CD changer or other audio source.

⁄Tape Outputs: Connect these jacks to the Record/Input jacks of an audio recorder.

¤Tape Inputs: Connect these jacks to the Play/Oout jacks of an audio recorder.

‹Preamp Outputs: Connect these jacks to an optional, external power amplifier for applications where higher power is desired.

›Subwoofer Output: Connect this jack to the line- level input of a powered subwoofer. If an external sub- woofer amplifier is used, connect this jack to the sub- woofer amplifier input.

fi8-Channel Direct Inputs: These jacks are used for connection to source devices such as DVD-Audio or SACD players with discrete analog outputs. Depending on the source device in use, all eight jacks may be used, though in many cases only connections to the front left/right, center, surround left/right and LFE (subwoofer input) jacks will be used for standard 5.1 audio signals.

flCoaxial Digital Audio Inputs: Connect the coax digital output from a DVD player, HDTV receiver, the S/P-DIF output of a compatible computer sound card playing MP3 files or streams, LD player or CD player to these jacks. The signal may be a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not connect the RF digital output of an LD player to these jacks.

‡Optical Digital Audio Inputs: Connect the optical digital output from a DVD player, HDTV receiver, the S/P-DIF output of a compatible computer sound card playing MP3 files or streams, LD player or CD player to these jacks. The signal may be a Dolby Digital signal, a DTS signal or a standard PCM digital source.

°Optical Digital Audio Output: Connect this jack to the optical digital input connector on a CD-R/RW, MiniDisc or other compatible digital recorder.

·Coaxial Digital Audio Output: Connect this jack to the coaxial digital input of a CD-R/RW, MiniDisc or other compatible digital recorder.

aRS-232 Port: This jack may be used to control the DPR 1005 over a bi-directional RS-232 serial control link to a compatible computer or programmable remote control system. Due to the complexity of programming RS-232 commands we strongly recommend that connections to this port for

control purposes be made by a trained and qualified technician. This jack may also link to a compatible computer to upgrade the software and operating sys- tem of the DPR 1005 when appropriate upgrades are available.

bAC Power Cord Jack: Connect the AC power cord to this jack when the installation is complete. To ensure safe operation, use only the power cord supplied with the unit. If a replacement is required, it must be of the same type and capacity.

cUnswitched AC Outlet: This outlet may be used to power any AC device. The power will remain on at this outlet regardless of whether the DPR 1005 is on or off.

REAR-PANEL CONNECTIONS 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Digital Path Receiver DPRSee trademark acknowledgements on DPR 1005 Digital Path ReceiverIntroduction Description and FeaturesThank You for Choosing Harman Kardon Modèle pour les CanadienImportant Safety Information Safety InformationSurround Mode Indicators To choose from the various mode optionsStandby/On Indicator This indicator is amber Modes, and then press the Surround Mode SelectorFRONT-PANEL Controls AB C D E F G H J I K REAR-PANEL Connections ‚ CD Audio Inputs Connect these jacks to REAR-PANEL Connections Volume Up/Down Buttons Main Remote Control FunctionsProgram Button SPL Select Button EzSet Microphone Sensor LensHave been pressed Channel Up/Down Selector . To raiseSpeaker Select Button Press this button Main Remote Control Functions Zone II Remote Control Functions System Installation Installation and ConnectionsSystem and Power Connections BUSInstallation Connections AC Power ConnectionsRS-232 Connections Speaker Placement System ConfigurationSystem Setup Speaker Selection and PlacementMaking Configuration Adjustments Input SetupSetting the System Configuration Memory For DVD and the Optical Digital Input 1 ‡Cursor is next to the REC OUT line, press › Navigation Button oSurround Setup Audio SetupFor added resolution Speaker OptimizerTo return to the Master Menu DTS-ES Discrete. Press the ‹/› Navigation Button Speaker SetupSet the unit for either 5.1 or 6.1/7.1 operation Delay Settings To bring up the Master Menu and pressMeasurement units is made, press the ⁄/¤ Using EzSet Output Level AdjustmentNavigation Button o to return the cursor to the FL position To change one of the individual speaker positionsUsing the EzSet remote Manual Output Level AdjustmentMENU, press the OSD Button to bring up Play shown in FigureTo return to normal operation of the DPR Additional Input AdjustmentsOperation Volume and Tone ControlBasic Operation Source SelectionDolby Mode Select Button or Surround Mode SelectionDigital Audio Playback Digital DTS Neo6Surround Mode Chart Selecting a Digital Source PCM PlaybackHdcd Playback Speaker/Channel Indicators Night ModeMP3 Audio Playback Tuner Operation Tape RecordingFront-Panel Connections Memory Backup Output Level Trim AdjustmentMenu system Dim Function Ments to make, press the OSD ButtonMenu system Turn-On Volume Level Advanced FeaturesMenu system Semi-OSD Settings Button is pressed is shownMenu system Installation Multiroom SetupMultiroom Operation RS-232 ControlButtons ç∂d Multiroom OperationSpecific source OutputConfiguring the Remote Programming Remote CodesRemote’s Main Menu message Bottom line Learning CommandsBe used Input Selector Button d that was justChanging Devices Commands from another device’s remote into the DPR remoteRemember that when you want to change devices Macro. The choices are the Power On ButtonMacro Programming Lower line of the display and then press the Set Button qProgrammed e.g., the Power On Button 1 or Power On VID 2/TV VID 3/Cable DPR Logic 7 hErasing a Macro Read a MacroPunch-Through Configuration Volume Punch-ThroughChannel Punch-Through When the red light under the Set Button q appears EzSet ConfigurationPages 27 RenamingRenaming a Device Numeric KeysResetting the Remote Renaming Individual KeysAt this point you have two options Additional Notes on Configuring and Operating the Remote Processor Reset Troubleshooting GuideDPR 1005 Technical Specifications

DPR 1005 specifications

The Harman-Kardon DPR 1005 is a remarkable piece of audio technology that has gained a loyal following among home theater enthusiasts. Launched as part of Harman-Kardon's digital receiver line, it combines sophisticated features with outstanding sound quality, making it an ideal choice for both music lovers and cinephiles.

One of the standout characteristics of the DPR 1005 is its powerful 7.1-channel amplifier, delivering an impressive 75 watts per channel. This configuration enables robust sound for both stereo and surround sound applications, ensuring that users can enjoy their favorite media with rich detail and clarity. The receiver is capable of decoding a variety of surround sound formats, including Dolby Digital, DTS, and more, allowing for an immersive auditory experience that enhances movie nights and music sessions alike.

The DPR 1005 integrates advanced digital processing technologies, including Harman-Kardon’s proprietary Logic 7 processing. This technology is crucial for creating a wide soundstage and providing a genuine multichannel experience from stereo sources. Furthermore, the receiver features a built-in AM/FM tuner, allowing users to easily access their favorite radio stations.

Connectivity is another strong suit of the DPR 1005. It comes equipped with multiple inputs and outputs, including HDMI ports, composite video, and S-Video connections, which facilitate seamless connection to a variety of devices such as Blu-ray players, gaming consoles, and set-top boxes. Additionally, it features an audio return channel via HDMI, which simplifies the connection to televisions, enabling an easy setup for both audio and video.

For those who appreciate fine-tuning their audio experience, the DPR 1005 offers an array of customizable sound settings. The receiver provides various equalization options and allows users to tailor the audio output to suit their preference and room acoustics. The on-screen menu is user-friendly, making adjustments straightforward even for those who may not be tech-savvy.

A noteworthy design element of the DPR 1005 is its sleek and modern aesthetic, fitting effortlessly within any home entertainment center. The display is clear and informative, ensuring easy navigation and control.

In summary, the Harman-Kardon DPR 1005 is a versatile and high-performance digital receiver that combines cutting-edge technologies with excellent sound quality. With its powerful amplification, advanced processing capabilities, and connectivity options, it stands as a formidable choice for those seeking an enhanced audio and visual experience. Its design and user-friendly features further solidify its position as a valuable addition to any home entertainment system.
Top Page Image Contents