Harman-Kardon Comprehensive Technical Specifications of the Harman Kardon DPR 1005 Stereo System

Page 52

DPR 1005 TECHNICAL SPECIFICATIONS

Audio Section

Stereo Mode

Continuous Average Power (FTC)

70 Watts per channel, 20Hz–20kHz,

@ <0.15% THD, both channels driven into 8 ohms

Seven-Channel Surround Modes

Power per Individual Channel

Front L&R channels:

70 Watts per channel

@ <0.15% THD, 20Hz–20kHz into 8 ohms

Center channel:

70 Watts @ <0.15% THD, 20Hz–20kHz into 8 ohms

Surround (L & R Side, L & R back) channels: 70 Watts per channel

@ <0.15% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High-Level)

200mV/47k ohms

Signal-to-Noise Ratio (IHF-A)

97dB

Surround System Adjacent Channel Separation

Pro Logic I/II/IIx

40dB

Dolby Digital

55dB

DTS

55dB

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

FM Tuner Section

 

Frequency Range

87.5 –108.0MHz

Usable Sensitivity

IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo 70/68dB

Distortion

Mono/Stereo 0.2/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz, 70dB

Image Rejection

80dB

IF Rejection

90dB

®

AM Tuner Section

 

 

 

Frequency Range

520–1720 kHz

 

Signal-to-Noise Ratio

45dB

 

 

Usable Sensitivity

Loop 500 µV

 

 

Distortion

1kHz, 50% Mod 0.8%

 

Selectivity

±10kHz, 30dB

 

Video Section

 

 

 

Television Format

NTSC

 

 

Input Level/Impedance

1Vp-p /75 ohms

 

Output Level/Impedance

1Vp-p /75 ohms

 

Video Frequency Response

 

 

 

(Composite and S-Video)

10Hz–8MHz (–3dB)

 

Video Frequency Response

 

 

 

(Component Video)

10Hz–50MHz (–3dB)

 

General

 

 

 

Power Requirement

AC 120V/60Hz

 

Power Consumption

Standby:

8.9W

 

 

Idle:

52W

 

 

Max:

760W

 

 

(7 channels driven)

 

Dimensions

Product

 

Shipping

Width

17.3 inches (440mm)

22.6 inches (573mm)

Height

4.5 inches (114mm)

8.9 inches (225mm)

Depth

18.8 inches (476mm)

21.9 inches (555mm)

Weight

23.1 lb (10.5kg)

27.5 lb (12.5kg)

Depth measurement includes knobs, buttons and terminal connections.

Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon, Power for the Digital Revolution and Logic 7 are registered trademarks of Harman International Industries, Incorporated.

TM is a trademark of Harman International Industries, Incorporated (patent no. 5,386,478).

*Trademarks of Dolby Laboratories.

DTS, DTS Surround, DTS-ES and DTS Neo:6 are registered trademarks of Digital Theater Systems, Inc.

VMAx is a registered trademark of Harman International Industries, Incorporated, and is an implementation of Cooper Bauck Transaural Stereo under patent license.

HDCD system manufactured under license from Pacific Microsonics, Inc. This product is

covered by one or more of the following: in the USA: 5,479,168; 5,638,074; 5,640,161; 5,808,574;

5,838,274; 5,854,600; 5,864,311; 5,872,531; and in Australia: 669114. Other patents pending. A-BUS and A-BUS Ready are registered trademarks of Leisure Tech Electronics Pty Ltd Australia. TiVo is a registered trademark of TiVo, Inc.

Replay TV is a registered trademark of Digital Networks North America, Inc.

250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com

© 2004 Harman International Industries, Incorporated Part No. ZKD0301HA00-9

Image 52
Contents DPR Digital Path ReceiverDPR 1005 Digital Path Receiver See trademark acknowledgements onDescription and Features IntroductionThank You for Choosing Harman Kardon Modèle pour les CanadienSafety Information Important Safety InformationTo choose from the various mode options Surround Mode IndicatorsStandby/On Indicator This indicator is amber Modes, and then press the Surround Mode SelectorFRONT-PANEL Controls AB C D E F G H J I K REAR-PANEL Connections ‚ CD Audio Inputs Connect these jacks to REAR-PANEL Connections Main Remote Control Functions Volume Up/Down ButtonsProgram Button SPL Select Button EzSet Microphone Sensor LensChannel Up/Down Selector . To raise Have been pressedSpeaker Select Button Press this button Main Remote Control Functions Zone II Remote Control Functions Installation and Connections System InstallationSystem and Power Connections AC Power Connections BUSInstallation ConnectionsRS-232 Connections System Configuration Speaker PlacementSystem Setup Speaker Selection and PlacementInput Setup Making Configuration AdjustmentsSetting the System Configuration Memory For DVD and the Optical Digital Input 1 ‡› Navigation Button o Cursor is next to the REC OUT line, pressAudio Setup Surround SetupFor added resolution Speaker OptimizerTo return to the Master Menu Speaker Setup DTS-ES Discrete. Press the ‹/› Navigation ButtonSet the unit for either 5.1 or 6.1/7.1 operation To bring up the Master Menu and press Delay SettingsMeasurement units is made, press the ⁄/¤ Output Level Adjustment Using EzSetNavigation Button o to return the cursor to the FL position To change one of the individual speaker positionsManual Output Level Adjustment Using the EzSet remoteMENU, press the OSD Button to bring up Play shown in FigureAdditional Input Adjustments To return to normal operation of the DPRVolume and Tone Control OperationBasic Operation Source SelectionSurround Mode Selection Dolby Mode Select Button orDigital Audio Playback Digital DTS Neo6Surround Mode Chart PCM Playback Selecting a Digital SourceHdcd Playback Night Mode Speaker/Channel IndicatorsMP3 Audio Playback Tape Recording Tuner OperationFront-Panel Connections Output Level Trim Adjustment Memory BackupMenu system Dim Function Ments to make, press the OSD ButtonAdvanced Features Menu system Turn-On Volume LevelMenu system Semi-OSD Settings Button is pressed is shownMenu system Multiroom Setup InstallationMultiroom Operation RS-232 ControlMultiroom Operation Buttons ç∂dSpecific source OutputProgramming Remote Codes Configuring the RemoteRemote’s Main Menu message Learning Commands Bottom lineBe used Input Selector Button d that was justCommands from another device’s remote into the DPR remote Changing DevicesMacro. The choices are the Power On Button Remember that when you want to change devicesMacro Programming Lower line of the display and then press the Set Button qPower On VID 2/TV VID 3/Cable DPR Logic 7 h Programmed e.g., the Power On Button 1 orErasing a Macro Read a MacroVolume Punch-Through Punch-Through ConfigurationChannel Punch-Through EzSet Configuration When the red light under the Set Button q appearsRenaming Pages 27Renaming a Device Numeric KeysRenaming Individual Keys Resetting the RemoteAt this point you have two options Additional Notes on Configuring and Operating the Remote Troubleshooting Guide Processor ResetDPR 1005 Technical Specifications

DPR 1005 specifications

The Harman-Kardon DPR 1005 is a remarkable piece of audio technology that has gained a loyal following among home theater enthusiasts. Launched as part of Harman-Kardon's digital receiver line, it combines sophisticated features with outstanding sound quality, making it an ideal choice for both music lovers and cinephiles.

One of the standout characteristics of the DPR 1005 is its powerful 7.1-channel amplifier, delivering an impressive 75 watts per channel. This configuration enables robust sound for both stereo and surround sound applications, ensuring that users can enjoy their favorite media with rich detail and clarity. The receiver is capable of decoding a variety of surround sound formats, including Dolby Digital, DTS, and more, allowing for an immersive auditory experience that enhances movie nights and music sessions alike.

The DPR 1005 integrates advanced digital processing technologies, including Harman-Kardon’s proprietary Logic 7 processing. This technology is crucial for creating a wide soundstage and providing a genuine multichannel experience from stereo sources. Furthermore, the receiver features a built-in AM/FM tuner, allowing users to easily access their favorite radio stations.

Connectivity is another strong suit of the DPR 1005. It comes equipped with multiple inputs and outputs, including HDMI ports, composite video, and S-Video connections, which facilitate seamless connection to a variety of devices such as Blu-ray players, gaming consoles, and set-top boxes. Additionally, it features an audio return channel via HDMI, which simplifies the connection to televisions, enabling an easy setup for both audio and video.

For those who appreciate fine-tuning their audio experience, the DPR 1005 offers an array of customizable sound settings. The receiver provides various equalization options and allows users to tailor the audio output to suit their preference and room acoustics. The on-screen menu is user-friendly, making adjustments straightforward even for those who may not be tech-savvy.

A noteworthy design element of the DPR 1005 is its sleek and modern aesthetic, fitting effortlessly within any home entertainment center. The display is clear and informative, ensuring easy navigation and control.

In summary, the Harman-Kardon DPR 1005 is a versatile and high-performance digital receiver that combines cutting-edge technologies with excellent sound quality. With its powerful amplification, advanced processing capabilities, and connectivity options, it stands as a formidable choice for those seeking an enhanced audio and visual experience. Its design and user-friendly features further solidify its position as a valuable addition to any home entertainment system.