Hoffman Media EDD-4C manual Installation Kit, Mounting the Dripmaster

Installation Kit

The Dripmaster is supplied with the following parts:

†1 – oil filter (fuel filter for ¼-inch hose)

†4 – mounting bolts

†8 – nuts

†8 – lock washers

†2 – cable bushings (glands)

Make sure that all of the kit items are present. You need to obtain ¼-inch fuel hose to complete the installation.

Mounting the Dripmaster

1.In order to mount the Dripmaster, drill four 1/4-inch holes in the metal plate that mounts the Dripmaster according to the drilling template shown in Figure 3.

Note: The mounting centers for the Dripmaster are shown on the back of the unit for convenience. Mounting the unit does not require more than four bolts.

2.Remove the Dripmaster front covers.

3.Place a bolt into a mounting hole, and keep it in place by using a nut.

4.Repeat step 3 for the other bolts.

5.Secure the device to the metal plate using the remaining nuts and lock washers.

9.55inches (242.6 mm)

4.33 inches

(110 mm)

0.25inches (6.4 mm)

3.23 inches

(82 mm)

4.17 inches

(106 mm)

Figure 3: Dripmaster—rear view showing mounting centers

9